You have 0 items in your cart.
By Brands
Anemometers
Category:
Anemometers
Measuring range: 0 to 150 m/sec Robust, thermal silicon chip sensor Penetration probe design, versatile use for pipe diameters from DN 50 (2") to DN 300 (12") Includes 5-point calibration certificate Measuring range: -50 to 400 ° C Minimum flow required: 2 m/sec Accuracy: +/-3 percent of reading, /-0.4 percent of final value Temperature dependency: compensated at 25 ° C, deviating temperatures: 0.1 percent of reading/kelvin Response time: t90 approximately 5 seconds Voltage supply: 12 to 24 Vdc +/-10 percent , power consumption less than 100 mA (starting current briefly 500 mA)
Category:
Anemometers
Measuring range: 0 to 80 Nm/sec Robust, thermal silicon chip sensor Penetration probe design, versatile use for pipe diameters from DN 50 (2") to DN 300 (12") Includes 5-point calibration certificate Minimum flow required: 1 m/sec Ambient temperature: -10 to +60° C Accuracy: +/-3 percent of reading, /-0.4 percent of final value Temperature dependency: compensated at 25 ° C, deviating temperatures: 0.1 percent of reading/kelvin Response time: t90 approximately 5 seconds Voltage supply: 12 to 24 Vdc +/-10 percent , power consumption less than 100 mA (starting current briefly 500 mA)
Category:
Anemometers
Automatic mean calculation and volume flow measurement Automatic allocation of duct cross-section to location (max. 99 locations) Internal data logger (3,000 readings) Simultaneous measurement of up to 6 parameters
Category:
Anemometers
Temperature, flow and volume flow measurement Multi-point and timed mean calculation Max/min values Hold button to freeze readings Display light Auto Off function Includes a soft carrying case TopSafe case protects against dirt and impact (optional)
Category:
Anemometers
Flow, volume flow (cfm) and temperature measurements Multi-point and timed mean calculations Max-Min values make comparisons fast and easy "Hold" button freezes readings Clear backlit display Auto Off
Category:
Anemometers
Real-time or average CFM, velocity, temperature True velocity measurement - no air density correction required Simple one hand operation Easy to carry and operate Adjustable A(K) factor (open area of grille) Required for proper systems commissioning Long battery life Built-in 3.93 in. vane
Category:
Anemometers
Real-time or average CFM, velocity, temperature True velocity measurement - no air density correction required Simple one hand operation Easy to carry and operate Adjustable A(K) factor (open area of grille) Built-in 3.93" diameter vane. -40 to 185° F storage temperature 32 to 122° F operating temperature 9V battery. 50 hours of battery life Weight 8 oz. Measures 11" length by 4" width by 1.8" height ABS housing material. Probe type NTC. 32 to 122° F measuring range Accuracy: +/- 0.9° F. Resolution: 0.1° F.
Category:
Anemometers
Direct display of volume flow (CFM) Multi-point and timed mean calculations Max - Min values make comparisons fast and easy "Hold" button freezes readings Back lit display Auto-Off function TopSafe, the indestructable protective case (optional)