LCR | Resistance | Super Megaohm | Calibrators

  • Filter

Wide band 1mHz to 200kHz Chemical Impedance Analyzer for Testing Electrochemical Components and Materials, Batteries, and EDLC Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The IM3590 is an advanced component tester especially suited to electrochemical impedance measurements and includes a variety of graphing functions that are needed for battery and chemical material testing. This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C Cable 9637 without hardware flow control.

32-channel Power Source Unit for the SM7810 Super Megohm Meter to Improve MLCC Testing Efficiency The SM7860 series allows for setting the dual-line output voltage on 8 channels or 16 channels, and enables up to 32-channel of output. The Hioki SM7860-07/-27 is a 32-channel, 10V discharge power source for the Hioki SM7810 Super Megohm Meter, providing positive and negative polarities required for MLCC test lines. The Power Source Unit SM7860 Series are produced to order. Select a power source unit combining positive and negative power source (1 kV/500 V), discharge, and low-voltage power source (10 V) modules to build a power source ideal for the leakage current test systems.

Measure Minute Changes in Voltage at a High Level of Precision across 54 Channels at the Same Time The MR8740 and MR8741 are rack-mountable data acquisition systems that deliver high-speed, multi-channel measurements over maximum of 54 channels. The MR8990 DVM unit is a 2-channel input unit for the MR8740/MR8741 for measuring minute fluctuations in output from sensors in automobiles and other equipment and voltage fluctuations in devices such as batteries at high levels of precision and resolution. Instrument requires input units and other dedicated options. Input cords not included. The MR8990 cannot operate alone.

Category: Signal Source

DC Voltage and Current Signal Generator and Tester for Routine Maintenance of Standard Devices The Hioki SS7012 is a compact DC signal source and calibrator that is used to perform maintenance or loop tests of instrumentation systems and can be operated from a computer via a USB cable. It can also be used to calibrate thermometers and measure DC voltage and DC current. Use of the AC Adapter and /or rechargeable batteries and dedicated charger is recommended

Wide band 1mHz to 200kHz LCR Tester for R&D Applications to Windings, Coil and Transformer Manufacturing Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in the testing of electronic components. The IM3533 series are Hioki’s first LCR meters to offer turn ration, mutual inductance and inductance difference measurements of transformers and coils, and are integrated with an internal DC bias to facilitate HDMI compliance testing. This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. All probes are constructed with a 1.5D-2V coaxial cable. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control.

32-channel Power Source Unit for the SM7810 Super Megohm Meter to Improve MLCC Testing Efficiency The SM7860 series allows for setting the dual-line output voltage on 8 channels or 16 channels, and enables up to 32-channel of output. The Hioki SM7860-06/-26 is a 32-channel, 1000V discharge power source for the Hioki SM7810 Super Megohm Meter, providing positive and negative polarities required for MLCC test lines. The Power Source Unit SM7860 Series are produced to order. Select a power source unit combining positive and negative power source (1 kV/500 V), discharge, and low-voltage power source (10 V) modules to build a power source ideal for the leakage current test systems.

4-Terminal Measurement Digital Multimeter with ±0.01% DCV Accuracy for High Precision Bench Testing Hioki benchtop digital multimeters are high precision 5-1/2 digit meters that sample 300 times/second. The 3239 Series measure using the 4-terminal method, and come with a comparator function that is especially useful for production lines. • 3239 (Built-in RS-232C interface) • 3239-01 (Built-in RS-232C & GP-IB interface) Note: 4-terminal measurement probes for resistance measurement are not included. Purchase the probes appropriate for your application separately.

Firmware Upgrade for the IM3570 Impedance Analyzer to Enable Cole-Cole Plots, Simple Circuit Analysis and Detailed Acceptance/Rejection Decisions Hioki LCR and Impedance Analyzers range from 4Hz to 120MHz devices to suit a wide range of applications in testing of electronic components. The IM9000 is a optional firmware upgrade for Model IM3570 to facilitate Cole-Cole plots, simple circuit analysis and detailed acceptance/rejection decisions, adding value to the IM3570 to serve more advanced component analysis. The Equivalent Circuit Analysis Firmware IM9000 is an optional function for the Impedance Analyzer IM3570. The IM9000 is not included in the standard package. To use the IM9000 function, please specify upon purchase of Model IM3570. Customers already using the Impedance Analyzer IM3570 can add the Equivalent Circuit Analysis Firmware IM9000 function. Please contact your local HIOKI representative.