Sub Categories
Features - 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB
Features Max. Current 3AFor: GPR-U/H/M Series,GPC/GPS/PPE/PPS/PPT/PSS/PST-Series
Features: ※ 6 1/2 Digit Display:1,200,000 counts※ DCV Basic Accuracy:0.0035%※ Dual Measurements to perform two selected measurements simultaneously※ Bright Vacuum Fluorescent Display (VFD)※ Provide AC+DC Voltage or Current Measurement Functions※ 11 Measurement Functions & 10 Math Functions※ High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements※ Temperature Measurement (RTD & Thermocouple) from -200°C ~ +1820°C ※ High Transmission Speed: Up to 2,400 readings/sec through the USB※ Standard Interfaces:USB, RS232C, Digital I/O※ Optional Interfaces:GPIB or LAN※ Optional Scanner Card:GDM-SC1 (V ch x16, I ch x2)※ Free PC software:DMM Viewer , LabVIEW Driver
Features: Temperature probe adaptor with thermocouple (K-type)Length : approx. 1000mm ※ Suitable for : GDM-8261A/8255A/8251A/8342
Description: ANEMOMETER Model : AM-4203HA * -P circuit, 0.4 to 25.0 m/s. * Max., Min., Memory recall button. * m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF). * Size : 185 x 78 x 38 mm.
Description: SMART CLAMP METERModel : CM-9941* Smart operation, 3 intelligent function : A, V, Ohm.* V: ACV, DCV measurement automatically.* Ohm: Ohm, Diode, Continuity, Cap. automatically.* A: ACA (600A, 400A).'* Frequency measurement.* 4,000 counts, 30 mm conductor size.* Size : 178 x 64 x 33 mm.
Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade. 2.Multi-cutting blades spacing:1mm/2mm/3mm 3.The number of square:25squares/100squares