• Filter

Kyoritsu 2012R   Innovative Multhimeters with current measurements up to 120A AC/DC • Unique Open Jaw technology for AC/DC current measurements • Very compact and as reliable as a tradictional full size multimeter

0.01mA resolution for DC current • Top class measurement 0.2% accuracy • Φ6mm clamp jaw easy to use in tight places • Measurement from 0.01mA to 120.0mA • Dual display with backlight shows both mA measurement and percent of 4-20 mA span • Spotlight for illuminating measurement point • Analog output terminal for recorder connection • Complies with IEC 61010-1 CAT.II 300V

Category: Logger

3 channel inputs for the simultaneous recording of Leakage Current, Load Current and Voltage • Power Quality analysis(only on KEW 5020)(Power Quality:Reference voltage, Swell, Dip, Short power Interruptions)   Large Capacity for storing 60,000 data points 60,000 data points can be recorded when 1ch is used, and when all the three channels are used, 20,000 data points per channel can be recorded   Lowpass Filter will filter out the harmonics(Cutoff Frequency = Approx. 160Hz)   LED flickers when the preset current / voltage value is exceeded   CALL: Confirmation of recorded data • The following can be displayed: number of recorded data points, (max+ min+ peak) value for each channel complete with time/date information in the Normal recording mode. (Detected values (i.e. when values are outside preset limits ) can be displayed in other recording modes) • RECALL: The last 10 recorded data points including time/date can be recalled on the logger display

AC Voltmeter with linear, easy-to-read scales. • Auto discharge function; any charge stored in the circuit under test will be automatically discharged after testing. • Designed to meet IEC/EN 61010-1 CAT.III 600V, CAT.II 1000V • Color-coded scales for easy reading. • Back light function to facilitate working at dimly illuminated locations. • Test lead set with remote control switch. • Shoulder strap for hands free.

Digital Illuminometer • Model 5201 is a highly portable and compact digital illuminometer for measuring illuminance from 0.1 to 19,990 Lux, with auto range switching. • The digital display is held for a preset time (about 20 seconds) and, therefore, facilitates reading, recording and measuring in any direction.

Category: Test Leads

Applicablemodel   5402D   • 1,500mm

High Accuracy, High Performance and Reliable Measurements • 0.09% basic DC accuracy • Large display with 6,000 counts • True-RMS Measurements • True-RMS or MEAN value detection mode can be selected * • Low-pass filter for motor drive measurements • User calibration function Safety design for industrial use • Complies with IEC 61010-1 CAT.IV 600V,CAT.III 1000V • Terminal shutter to prevent incorrect test leads' insertion in current terminals • Very wide operating temperature range from-10 to 55ºC

AC and DC voltage tests up to 690V with LEDs and LCD • Comply with the latest standards IEC 61243 and IEC 61010 • Novel designLarge and bright LEDs: Values are visible in the dark placeErgonomic design fits in the hand • Two functions are available in one model"Measurement without battery" and "Self Test (all LED on)" • Test leads withstand harsh environments at low temperature • Penlight (white LED) • Auto-power ON/OFF • Audible indication • Variable test tips, φ2mm or φ4mm • Probe protection cover can store the attachment of caps • IP65 (IEC 60529)