Kyoritsu

  • Filter
Category: Case

Applicablemodels   2000     2001     2012R   • Carrying case • 160 (L) × 103 (W) × 28 (D)mm

Bargraph to display insulation resistance. • Displays the value of external AC voltage along with flashing symbol. • Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value. • Live circuit warning beeper. • Releasing the test button automatically discharges the charges stored in the circuit under test. • 200mA continuity measuring current to IEC 61557. • Minimum 1mA current on insulation tests to IEC 61557.

Category: Clip etc.

Applicablemodels   7103     7139     7103A     7139A     7149     7150     7149A     7150A   • Hook type prod

CAT.IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits. • Accurate True-RMS reading of AC current or voltage with distorted waveform. • Can measure AC and DC currents up to 2000A.

Applicable model 5010/5020 Conductor size Φ55 Rated current AC 1000A Output voltage AC 500mV/1000A (AC 0.5mV/A) Accuracy |±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz) Withstand voltage AC 5350V for 5 seconds Cable length Approx. 2m Output connector MINI DIN 6pin Operating temperature ranges 0~40ºC, less than 85% RH (without condensation) Output impedance Approx. 1.5Ω Applicable standards IEC 61010-1:2001,IEC 61010-2-032:2002,CAT.III 600V pollution degree 2 Dimensions 170(L) x 105(W) x 48(D) mm Weight Approx.360g Accessories 9094 (Portable case), Instruction manual, Cable marker Option 7146 (Banana Φ4 adjuster plug)7185 (Extension Cable)

Wide range measurements from 500V to 5000V and up to 1000GΩ. • Large digital display with Bar Graph indication and back light. • Polarization Index measurement (PI). • Timer measurement function. • Indication of Output voltage and Discharge voltage. • Auto-discharge function and Voltage output warning function. • Auto power off and Battery Check. • Safety standard IEC 61010-1 CAT.III 600V

Applicable model 5010/5020, 6310, 6315 * Cannot be used for power measurement.

Digital Phase Indicator with open phase checker • Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time. • Small, lightweight, and portable.