Accessories

  • Filter
Category: Probes

The HP-1 is an oven hotplate thermocouple that is designed for monitoring and recording the temperature of stove top griddles, burners and other flat surfaces. It can measure temperatures up to 390°F (200°C) and may be used with electric stoves. To use, simply connect the HP-1 to a thermocouple based temperature data logger, such as the TC101A or TCTemp2000, then start the logger. Place the HP-1 directly on the flat surface, and position the data logger a safe distance away from the heat source. Once monitoring is complete, data can be downloaded and analyzed using the MadgeTech data logger software.

Category: Probes

The pH-RUGGED ELECTRODE is a submersible CPVC pH electrode that is suited for use in outdoor applications such as monitoring drums, tanks or streams. The electrode has a quick latch mechanism which allows it to be inserted into a BNC connector by simply rotating it a quarter turn. For use with the MadgeTech pH loggers, a cable assembly and an RTD temperature reference is required. Two mounting assembly options are available. The pH RUGGED ATC CABLE mounting assembly connects directly to the pH-RUGGED ELECTRODE and has a built in RTD probe, providing automatic temperature compensation (ATC). The pH-RUGGED PROBE cable assembly connects to the pH-RUGGED ELECTRODE and can be used with an external RTD probe or may be used with one of the resistor kits included with the MadgeTech pH loggers. Automatic Temperature Compensation is preferred, as it provides the best accuracy. When the precision and accuracy of ATC is not necessary, use the included resistor kit to simulate the temperature of the application to minimize error. Compatible MadgeTech Data Loggers: pHTemp101, pHTemp2000, RFHTemp101A. Resistor Kit: Reference the table included with the resistor kit to calibrate the resistor...

pH1

Category: Probes

General Purpose pH probe for use with the pHTemp101. Features standard BNC connector. Clear, epoxy-bodied, gel-filled combination electrode measures the entire 0 to 14pH range. Soaker storage bottle included.

Category: Probes

The RFOT-HDA is a probe attachment for the RFOT data logger. The device is built for use with hot dogs, sausages, and other small meat products. To use, simply slide the RFOT-HDA over the RFOT probe, then mount in place using two set screws. Next, insert a meat product through the o-ring onto the probe. The RFOT-HDA will guide the product into place, ensuring that the probe is inserted into the center of the product. Internal temperature can then be logged and analyzed using the RFOT data logger. The RFOT-HDA is also available in a smaller version called the RFOT-HDA-SM, which can be used with the RFOT-SMP (2.5" probe) data logger.

Category: Probes

Precision 100 Ohm, 4 wire RTD probe, with a 6" or 12" sheath.

Category: Probes

100 Ohm, 4 wire RTD probe with metal strain relief wrapped. Available with a 6" or 12" sheath.

Category: Probes

Type K Thermocouple assembly. 60” PFA wire with a 1/8” diameter. 5.75” stainless steel sheath. For CTL2000.

Category: Probes

Type K Thermocouple assembly. 60” PFA wire with a 1/8” diameter. 3” stainless steel sheath. For CTL2000.