Moisture meters

  • Filter

This was the first company in Japan to develop a practical Grain Moisture Tester. Since that time, this has relentlessly pursued the further development of grain moisture testers. Now, thisintroduces PM-410 as the most reliable Grain Moisture Tester in the world. Calibration was made against Oven Method which designated as an official standard(ie:ISO or USDA).Operation is very easy and moisture content can be displayed by simply pouring a grain sample into the measuring section after pressing the"MEASURE"switch. This is very portable thus can be used immediately at any location.   ●SpecificationsPM-410 Measuring method Dielectric constant Measuring range 1 ~ 40 %(depends on Sample) Accuracy 0.5% Power source 4pcs. 1.5V Batteries ("AA" size) Dimensions 130 (W) X 190 (D) X 210 (H) mm Weight Net: 1.0kg Shipment: 3.0kg

Interchangeable Digital Sensor Probes. Thermistor Sensor For Temperature Measurement, Fast Response Time Dual Display. Dew Point Measurement. PC Interface. 16,000 Records Data Logger. Auto Shut Off For Battery Saving. Extendable Cable. Tilt Stand. DSO stands for Defence Science Organization (one of the Top Government Research Lab For Weaponry andsupposedly the best brain) The legend for Center 318 : All products sold zero defects till today & traceable to NIST.

TST0100; wood and building material moisture meter, incl. protective cap, batteries and calibration protocol 606-1 measures material moisture. Material moisture is displayed in percent by weight using stored material characteristic curves for wood and building materials. Accurate wood moisture measurement with stored characteristic curves for beech, spruce, larch, oak, pine, maple Additional characteristic curves to locate wet points in building materials for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick Hold function for easy readout of readings Display illumination Self-test function Protective cap for safe storage Belt case, wrist strap and calibration protocol included Made in Germany Latest technology Storage temperature -40 to +70 °C Operating temperature -10 to +50 °C Battery type 2 batteries Type AAA Battery life 200 h Weight 90 g Dimensions 119 x 46 x 25 mm Probe type Conductive measurement cell Meas. Range 0 to 50 % Accuracy ±1 % Resolution 0.1 Additional benefits for TST0101: Measurement of temperature and humidity in ambient air Air humidity...

Equipped with 10 characteristics curves for soft wood, hard wood, chipboard, anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete, vertical hole brick and solid brick Measurement depth up to 5 cm Handy shape for optimum contact pressure Hold, max., min. function Illuminated digital display Characteristics curves were developed in cooperation with the LPI institut Advantageous for measurements on exotic woods: non-destructive determination of wood moisture TST0269 TST0269, wood and material moisture measuring instrument, incl. battery and calibration protocol The TST0269 allows fast and non-destructive observation of the material moisture of woods and building materials. This allows the ideal time and place for any destructive measurement which may be necessary to be determined. The display is in percent by weight in comparison to the dry mass of the material. The TST0269 makes work easier for all those who need to observe the development of drying in floors, walls and surfaces. Equipped with 10 characteristics curves for soft wood, hard wood, chipboard, anhydrite screed, cement screed, lime sand brick, aerated concrete, concrete,...

FD-610 is upgraded model from FD-600 which was one of the largest Selling IR moisture balances in our record. No other moisture testers offers the versality of FD-610 which used 5mg resolution Weiging unit and a proven 185-Watt infrared bulb.Also feature is "Auto measurement mode" the total drying process control software,Which halts the heating and displays the moisture content automatically, furthermore, Optional printer can be available. ●SpecificationsFD-610 Measurement method Detection of weight loss by heating & drying Sample mass 5~70g(optional weight sampling) Resolution 5mg / 0.1% Measurement range 0~100%(Wet-base Moisture/Solid content)0~500%(Dry-base Moisture content) Precision Sample 5g or greater; 0.1% Display format Digital LCD display Measurement mode Time/Automatic/Continuous measurement External I/O Standard RS-232C serial interface Heat source 185W Infrared bulb X 1pc. Power source AC100~120/220~240V(50/60Hz) Dimensions & weight Net ; 210X320X335(mm),approx.3.2kgShipment;280X430X580(mm)approx.7.5kg(including printer) Sample dish SUS(diameter 95mm,depth 10mm) Options Printer...

Specification:The TK100G Grain Moisture Meter is used for fast and accurate measurement of moisture in the process of allotmetn,acquisition,storage,machining of packed grains,Barley,Corn,Hay,Oats,Rapeseed,Rough Rice,Sorghum,Soybeans and Wheat. Display:4 digital LCD Measuring range :7%-30% Temperature:0-60 Humidity:5%-90% Resolusion:0.1 Accuracy: ± 0.5%n Operation: Electrical Resistance Method, Automatic temperature Compensation Power supply: 4x1.5 AAA size (UM-4) battery Dimensions:460mm×75mm×35mm Weight:203g (not including batteries) Grains:6 kinds

◇ Multi-colors LED bar-graph readout. ◇ 5.5% to 100% moisture range. ◇ 0~1Vdc signal output. ◇ Audible alarm starts for catch reading. ◇ Built-in calibration function. ◇ sturdy and durable moisture probe. ◇ CE and RoHS approved.