FEATURES ● Triangular-shaped design keeps the sections aligned during extension and retraction.● Push button release for stick extension and retraction. ● Telescopic design allows for easy assembly, storage and transportation.● Withstands voltage rating of 100kV from 30cm for 5 minutes. ● Universal end fitting accepts a wide variety of standard attachments.● Highly visible yellow tip section.● Easy-to-replace sections.● Carrying bag included. ● Optional integrated height measurement scale.● Complies with IEC 62193 safety standard. SPECIFICATIONS SEW3300HS-175-3 SEW3301HS-175-4 SEW3302HS-175-5 HS-175-6 SEW3303HS-175-7 SEW3305HS-175-8 SEW3304HS-175-9 Sections 3 4 5 6 7 8 9 Extended length (m) 3.82 5.10 6.42 7.78 9.18 10.62 12.09 Retracted length (m) 1.48 1.53 1.58 1.63 1.68 1.73 1.78 Stick width...
● Single foamed hot stick.● Universal sunrise fitting on the head to fit special tool fittings.● Rated at 100 kV per 300mm (5 minutes).● Can be connected to 275 HP HV proximity detector, 21X HVD capacitive HV detector and 277 HP Non-contact HV detector.● Meets IEC 60855.● Reasonable price.● Accessories
● Single foamed hot stick.● Universal sunrise fitting on the head to fit special tool fittings.● Rated at 100 kV per 300mm (5 minutes).● Can be connected toHV proximity detector, 21X HVD capacitive HV detector and Non-contact HV detector.● Meets IEC 60855.● Reasonable price.● Accessories
FEATURES ● Measures positive polarity DC voltages up to 40kV.● Lightweight and rugged.● 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.● Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. SPECIFICATIONS Input impedance 600 MΩ Attenuation ratio 40000 : 1 Accuracy DCV (0 ~ 20kV) ± 2% DCV (20kV ~ 40kV) ± 3% Max. working voltage DC 40kV Operating temperature 0°C ~ 40°C Storage temperature -10°C ~ 50°C Cable length 1 m Weight Approx. 400g Safety standards EN 61010-1 EN 61010-031 EN 61326-1
FEATURES ● 2 ranges for selection ( 2 function buttons )● Power consumption: Off : Less than 5uA Low voltage detection mode: Less than 40mA High voltage detection mode: Less than 40mA● Circuit test function Press the Test button to make sure the whole circuit is working well before testing actual high voltage circuits.● Press the LOW button, 277 HP is ready for low voltage detection.● Press the HIGH button, 277 HP is ready for high voltage detection.● Optional accessory
● Telescopic, compact, lightweight.● High voltage detection.● Low voltage detection.● Self test button feature.● Easy-to-recognize indication.● Waterproof. The HD detect the presence of voltage in AC lines. An elongate insulation rod permits checking of high tension circuits at safe distance for voltage. The equipment is compact, lightweight, and easy to handle, and is also available for voltage detection in low-tension circuits. ●Working voltage range: H.V. : 3kV~24kV AC....hold grip portion to detect. L.V. : 80V~600V AC....hold nameplate portion to detect. ●Frequency : 50Hz / 60Hz ●Operation Test : (Initial voltage) (a)When stretched, hold the grip portion. Put the sensing tip in contact with the voltage : 250V AC ± 50V the LED and buzzer should work. (b)When retracted, hold the nameplate portion. Put the sensing tip in contact with the voltage : 80VAC or below the LED and buzzer should work. ●Operation start distance Distance at which operation starts when front metal is brought near Ø5mm O.C. wire with grip portion meld by hand. Where 24kV√ 3 (voltage to ground)....about 20cm. Where 6.6kV√ 3 (voltage to...
● Telescopic, compact, lightweight.● High voltage detection.● Low voltage detection.● Self test button feature.● Easy-to-recognize indication.● Waterproof.
FEATURES ● Telescopic, compact, lightweight.● High voltage detection.● Self test button feature.● Easy to recognize indication.● High intensity red light emitting diode and intermittent audible sound for easy recognition in full sunlight and noisy environments.● Waterproof. SPECIFICATIONS SEW0008 SEW0007 Withstand voltage (On insulating rod) 100kV / 300mm : 1 minutes Insulation resistance 2000MΩ min by 1kV / DC megger at the same testing location as withstand voltage Leakage current 100uA or less than 100uA at withstand voltage test Construction Water proof (detecting head impervious to water) Measuring voltage range 6kV~36.5kV 6kV~81.5kV Operation start voltage (To ground) 2.7kV 2.7kV Display Light : Flashing red light. Sound : Intermittent sound 50 dB apart 3 m. Frequency 50/60Hz Operating temperature 0°C ~ 40°C Battery 2 button-cells LR44(1.5V) ...