GasDNA

  • Filter

The non-contact infrared thermometer is the ultimate tool for temperature measurements. It can measure from 200 to 2400 ℃ (392 to 4352 ºF) in the distance of 100:1 DS (Distance to Spot) ratio. Furthermore, the memory mode can record and display the specific measurement with emissivity. There are many mathematical modes for the Infrared function. [ Specification ] Item Non-contact Infrared Scan function Thermocouple Probe Scan function (K type; a bead wire included.) Measurement Range 200 ~ 2400℃ K type: -64 ~ +1400℃ Bead: -50 ~ +250℃ Operating Range 0 ~ 50℃ Accuracy ±2% of reading ±1% of reading or 1℃ Emissivity Range 0.1 ~ 1.0 (Default 0.95) Response Time 1 sec D:S (Distance:Spot) 100:1 Memory Detailed 24 Memories with Temperature & Emissivity Battery Life min 140 hours continuous use (Alkaline, without Laser and Back Light.) Dimensions 233.8 x 207.5 x 60.6mm Weight 550g including batteries (AA*2pcs)  

Category: Indicator

DI-20 has built-in high performance A/D converter & micro-processor which enable multi input signals, output signal transmission, communication, and alarm

Category: Accessories

Air purge removes dust around infrared thermometer. It can be applicable to IR-20, IR-20-4W, IR-21, IR-40, IR-80, IR-80-H, 6-IRman, 2S-IR-100, 2IGA-IR-100

Category: Accessories

Water-cooling jacket is to use under the high temperature environment. It makes infrared thermometer cool down and working properly. It can be applicable to IR-40, IR-80, IR-80-H, 2S-IR-100, 2IGA-IR-100

Category: Accessories

Bracket is to fix infrared thermometer.

Category: Accessories

Converter is to use to communicate with computer. It can be applicable to IR-21, IR-40, IR-80, IR-80-H, 6-IRman. 2S-IR-100, 2IGA-IR-100

GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more comprehensive.

GMS-1500 is four channel digital controller which can be connected to four (4) gas detectors. Receiving analogue continuous signal from four (4) detectors and converting it into digital signal, GMS-1500 provides various alarming and monitoring environment by micro-processor. Also, GMS-1500 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more comprehensive.