GW INSTEK GPI-625

Features:

※ Built-in Withstanding/Insulation Tester
※ 500VA Test Capacity
※ Zero Turn on Operating Switch
※ Automatic NG Indicator of Alarm Lamp and Buzzer
※ Lower Set for NO-Contact Judge
※ Digital Cut-Off Current Set
※ Test on and Result Output Signal
※ Auto W-I and I-W Test Procedure
※ Optional : Remote Control Box GHT-106R

Description:

500VA, Withstanding Voltage(AC)/Insulation Tester.

The GPI-625 is a simple 2-in-1 (AC Withstanding / Insulation Resistance) analog safety tester geared toward accurate hazard-free automatic testing. Auto testing can be set to run withstanding and insulation resistance testing in any preferred order. The optional GHT-106R remote controller can be used to remotely run the timer and tests. The GPI-625 has dedicated input/output terminals and a current monitor terminal for external device monitoring. Equipped with a large 500VA AC capacity, the GPI-625 is ideal in a test & analysis environment for testing electronic equipment, components, and insulation materials.

Specification:

AC HI-POT
Voltage 0 ~ 2.5kV, 0 ~ 5kV 2 range AC line waveform
Voltage Regulation 20%
Max Current 100mA
REFERENCE VALUE
Setting 0.5, 1, 2, 4, 8, 10, 100mA 7 ranges
combination of 0.5mA ~ 25.5mA
Low Reference 0 to 1/2 of reference value, continuously variable
Meter 2.5kV, 5kV two ranges, ± 3% of full scale
JUDGEMENT
Description Window Comparator System
Accuracy ±5% of high reference value
±20% of low reference value (1/2 of reference value)
CURRENT MONITER METER
Description ±5% of full scale
INSULATION RESISTANCE
DC Voltage 500V/1000V
Resistance Range 1MΩ ~ 2000MΩ
Resistance Accuracy 5% ~ 10% depends on range
JUDGEMENT
Description Window Comparator System
Accuracy ±10% ~ ±20% depends on range
TIMER
Setting 0.5s ~ 10min
Accuracy ±10% of full scale
GENERAL
Type of Test AUTO W-I, AUTO I-W, MANUAL-W, MANUAL-I
Remote Control Test, Reset, Timer On-Off control
Output Signal Test ON, GOOD, NG and Read signal
(The rating of the contact signal are 110VAC 1A or 30VDC 1A)
AC Outlet Use only Buzzer and warning light, the output voltage depend on the line voltage and the current is 1A
Test Mode Double action, good hold, momentary, NG alarm
POWER SOURCE
  AC 120V ± 10%, 50/60 Hz
AC 220V/240V order made
DIMENSIONS & WEIGHT 
  430(W) x 223(H) x 510(D) mm
Approx. 28kg

Accessories:

User manual x1, Power cord x1, GHT-105 x1
 
 
OPTION
GHT-106R  Remote Controller

Ordering Information:

GPI-625 AC 500VA AC Withstanding Voltage / Insulation Analog Safety Tester

 

 

Location

Ask about this product