Fluke 3310-PR-TF 5000A Flex Thin Flex Current Probe, 2 Feet Long For the Fluke 1750 Power Recorder

Electrical Characteristics
Measurement Range 100 to 5000 A (with a crest factor ≤3)
Frequency Range 40 Hz to 5 kHz
Accuracy (@ 25°C) ±1% of reading
(10 % to 100 % of range)
±0.2% of reading per °C
Temperature Coefficient ±0.05% of reading per °C
Position Sensitivity
(w/ cable >25 mm from coupling)
±2% of reading
External Field
(w/ cable >200 mm from head)
±1% of reading
Working Voltage
(see Safety Standards)
1000V ac rms or dc
General Characteristics
Probe and Cable Material Alcryn 2070NC, reinforced insulation, UL94 V0, Color: RED
Probe Cable Length 24 in. (610 mm)
Probe Cable Diameter 0.3 in. (8 mm)
Transducer Bend Radius (min) 1.5 in. (38.1 mm)
Output Cable 2 core screened, double insulated, 3 meters long
Output Connector LEMO 6 pin male connector
Operating Temperature Range -4 to +158°F (-20 to +70°C) (the temperature of the conductor under test shall not exceed 176°F /80°C)
Storage Temperature Range -40 to 176°F (-40 to +80°C)
Operating Humidity 15% to 85% (non condensing)
Altitude max 6562 ft. (2000 m)
Degree of ingress protection IP40 (IEC 60529)
Safety Standards
EN/IEC 61010-1:2001
EN/IEC 61010-031:2002+A1:2008
EN/IEC 61010-2-032:2002
Pollution Degree 2
Use of the Probe on uninsulated conductors is limited to 1000 V under CAT III installations and 600 V under CAT IV installations ac rms or dc and frequencies below 1 kHz.
Note that the safety rating for the output to ground is limited to 30 V ac rms or dc by the connector specified.


Ask about this product