By Brands

Sub Categories

Logo
Lutron Electronic Enterprise Co., Ltd. was established in 1976 and has been the Taiwan's leading...
mitcorp
Certified by the well-known vehicle brands Audi, Skoda, VOLVO and Volkswagen, Mitcorp embodies a...
Yokogawa’s Portable and Handheld Instruments offer a broad range of portable test equipment to...
  • Filter

Features: ※ 6 1/2 Digit Display:1,200,000 counts※ DCV Basic Accuracy:0.0035%※ Dual Measurements to perform two selected measurements simultaneously※ Bright Vacuum Fluorescent Display (VFD)※ Provide AC+DC Voltage or Current Measurement Functions※ 11 Measurement Functions & 10 Math Functions※ High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements※ Temperature Measurement (RTD & Thermocouple) from -200°C ~ +1820°C ※ High Transmission Speed: Up to 2,400 readings/sec through the USB※ Standard Interfaces:USB, RS232C, Digital I/O※ Optional Interfaces:GPIB or LAN※ Optional Scanner Card:GDM-SC1 (V ch x16, I ch x2)※ Free PC software:DMM Viewer , LabVIEW Driver  

Features: Temperature probe adaptor with thermocouple (K-type)Length : approx. 1000mm ※ Suitable for : GDM-8261A/8255A/8251A/8342

Category: HA SERIES

Description: ANEMOMETER Model : AM-4203HA * -P circuit, 0.4 to 25.0 m/s. * Max., Min., Memory recall button. * m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF). * Size : 185 x 78 x 38 mm.

Description: SMART CLAMP METERModel : CM-9941* Smart operation, 3 intelligent function : A, V, Ohm.* V: ACV, DCV measurement automatically.* Ohm: Ohm, Diode, Continuity, Cap. automatically.* A: ACA (600A, 400A).'* Frequency measurement.* 4,000 counts, 30 mm conductor size.* Size : 178 x 64 x 33 mm.

Features * 50M/30MHz with 100MSa/s and 2 Channles * Equivalent Time Sampling of 500MSa/s max. * Acquire Mode : Peak Detect, Envelop, Persistence * Pre-Trigger Function 0 ~ 10 div * ROLL Mode to 100s/div * Waveform SAVE/RECALL 10 sets (REF0~REF9) * Max. Sweep Rate 10ns/div * Panel Setting SAVE/RECALL 10 sets (M0~M9) * RS-232C Interface

Category: Ion Meters

Bante320 is a multi-parameter ion meter used for measuring the ion concentration and pH value of liquids. The meter is equipped with a BNC connecter that can connects various combination Ion Selective Electrodes. Features: During the pH mode, Up to 5 points push-button calibration with auto-     buffer recognition. Selectable pH buffer standards and temperature units. Automatically calculates and displays electrode slope after calibration. During ORP mode, Single point offset calibration allows user adjusts     displayed value to a known standard. Absolute or Relative millivolt (R.mV) measurement provides accurate     ORP readings. During the ion mode, 2 to 5 points push-button calibration from low to     high concentrations. Selectable multiple concentration units, including ppm, mg/L and mol/L. Direct readout ion concentration simplifies the elaborate measurement     process.

Features - Frequency Range: 9kHz ~ 3GHz- High Frequency Stability: 25ppb (0.025ppm)- RBW: 10Hz ~ 10kHz in 1-3 steps, 10kHz ~ 1MHz in 10% adjustable steps- Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset- Built-in Measurement Functions: Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO- Built-in Spectrogram and Topographic Display Modes- Gate Sweep Function- 1Hz Resolution Marker Counter- AM/FM Demodulation Analysis- 886MHz IF Output for User’s Extended Applications- Various Interface: USB Host/Device, RS-232, LXI, Micro SD, GPIB (Optional)- 8.4" large TFT LCD display with SVGA resolution of 800 *600- DVI-I Output for External Digital Display- Built-in Preamplifier, 50dB Attenuator, and Sequence Function- Optional 6GHz Power Sensor, Tracking Generator, Battery Back