Micro 5 Multi-Gas Detector

 

  • Monitor up to 5 gases simultaneously
  • IP66/67 rating for moisture/dirt protection
  • Concussion-proof boot for greater durability
  • Optional attachable/removable sampling pump

MICRO 5 Multi-Gas Detector (5 gases)  monitors 5 gases simultaneously. It's waterproof to 3 ft and has a concussion proof boot with an optional attachable/removable pump.

MICRO 5 Multi-Gas Detector (5 gases)  portable gas detector simultaneously monitors and displays up to 5 potential atmospheric hazards including oxygen, combustible gases and a range of toxic gases. Compact and lightweight, MICRO 5 Multi-Gas Detector (5 gases)  adds multi-gas detection to  water-resistant line of detectors. Audible, visual and vibrator alarms activate in the event of a low, high, TWA or STEL alarm condition. An optional motorized pump is available.

Beyond features that come standard with portable instruments such as confidence beep, full function self test, simple automatic calibration proceedure and passcode protection, MICRO 5 Multi-Gas Detector (5 gases)  includes an extended selection of user-settable field options now including: stealth mode, backlight options, selectable ppm resolution, STEL / TWA measurement choice, combustible/PID correction factor options, user-settable calibration gas concentrations and multi-language support.

Supported Gases:

  • H2S - hydrogen sulfide
  • HCN - hydrogen cyanide
  • CO - carbon monoxide
  • Cl2 - chlorine
  • O2 - oxygen
  • ClO2 - chlorine dioxide
  • SO2 - sulfur dioxide
  • O3 - ozone
  • PH3 - phosphine
  • LEL combustibles
  • NH3 - ammonia
 
  • NO2 - nitrogen dioxide
 

 

  • Compact (5.7 x 2.9 x 1.5 in. / 14.5 x 7.4 x 3.8 cm) and lightweight (13.1 oz. / 370 g)
  • Rugged, highly water-resistant design.. Continuous LCD shows simultaneous gas concentrations for 5 gases
  • Integral concussion-proof enclosure for the most rugged environments
  • Integral motorized pump option for remote sampling (optional)
  • Two power options: three AA alkaline batteries or a rechargeable battery pack
  • Provides 95 dB alarm tone and two bright wide-angled alarm bars
  • Equipped with internal vibrating alarm for high noise areas
  • Multi-language support in English, French, German, Spanish and Portuguese
  • Three backlight options: standard—activates in low light (auto), in alarm (auto) and reactivates on-demand; alarm only—activates in alarm conditions and reactivates on-demand; stealth mode
  • Four alarm levels: instantaneous Low and High Alarm for all gases; TWA (time weighted average) and STEL (short term exposure limit) for toxic gases
  • Simple automatic calibration procedure; compatible with BW MicroDock II system
  • Records TWA, STEL and maximum exposures to gas and displays readings on command
  • User selectable field options include: confidence beep, pass code protection, latching alarm, calibration due date and “SAFE” display function, stealth mode, selectable ppm resolution for some gases (e.g. SO2 0.1 ppm)
  • Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms

Gas

Measuring range

Resolution

TWA

STEL

LOW

HIGH

O2

0-30.0%

0.1

N/A

N/A

19.5

22.5

CO

0-999 ppm

1

35

200

35

200

H2S

0-100 ppm

1

10

15

10

15

PH3

0-5.0 ppm

0.1

0.3

1.0

0.3

1.0

SO2

0-100 ppm

0.1

2

5

2

5

NO2

0-99.9 ppm

0.1

2.0

5.0

2.0

5.0

HCN

0-30.0 ppm

0.1

4.7

10.0

4.7

10.0

Cl2

0-50.0 ppm

0.1

0.5

1.0

0.5

1.0

NH3

0-100 ppm

1

25

35

25

50

ClO2

0-1 ppm

0.1

0.1

0.3

0.1

0.3

O3

0-1 ppm

0.1

0.1

0.1

0.1

0.1

PID

0-999 ppm

5.0

50

100

50

100

LEL

0-100% LEL
0-5% v/v

1%

N/A

N/A

10%

20%

  •  

Auto zero:

Yes

Calibration:

Automatic

Backlight:

Standard Mode: low light (auto); alarm condition (auto); reactivation on demand
Alarm Only Mode:
alarm condition (auto); reactivation on demand
Stealth Mode: backlight inactive; audible and visual alarms silenced

Full function self-test:

Sensor integrity, circuitry and battery; audible/visual alarms

Sensor:

Plug-in, electrochemical cell (toxic and oxygen); catalytic (LEL)

User field options:

Confidence beep, pass code protection, latching alarms, passed calibration user- lockout option, “SAFE” display function, stealth mode, oxygen auto-cal on start-up, alarm only backlight mode, combustible gas measurement (%LEL or % by volume methane), LCD language option, STEL calculation choice, TWA calculation choice

ALARM INDICATORS:

combustible correction factor options, user-settable calibration gas levelClearly advises alarm conditions with audible, visual and vibrator alarms

Visual alarms:

Two flashing alarm bars visible from all angles
LCD indicates gas present and alarm levels encountered

Audible alarm:

Typically 95 dB at 1 ft./ 30 cm variable pulsed audible alarm

Vibrator alarm:

Pulses warning in gas alarm conditions, or for any status alarms

Other:

ALARMLEVELS: Low battery, over range, multiple gas / pump and failed or missing sensor Instantaneous Low Alarm for all gases; Instantaneous High Alarm for all gases;

LCD:

TWA (time weighted average) and STEL (short term exposure limit) for toxics Continuous, alphanumeric gas readout and status display advises

Gases monitored:

H2S, CO, O2, SO2, PH3, NO2, NH3, HCN, Cl2, ClO2, O3, PID and/or combustibles (0-100% LEL or 0-5.0% methane)

Gas concentration:

Simultaneously and continuously displays gas concentration(s) for all sensors (in ppm, %LEL, or % v/v)

STEL/TWA ppm or %:

Records STEL and TWA exposures and displays on demand

Peak ppm or %:

Records and displays peak exposure to gas and displays on demand

Alarm setpoints:

Displayed on activation

Calibration due date:

In days remaining

Clock:

Real-time clock setting displayed on start-up (datalogger models only)

TESTS:

Full function self-test: Full function self-test on activation

Battery:

Continuous

GENERAL SPECIFICATIONS:

Rugged, composite material; two-shot molded polymer case with integral anti-shock boot

Operating temperature:

-4 to 122 oF / -20 to 50 oC

Humidity:

0 - 95% RH (non-condensing)

EMI/RFI:

Complies with EMC Directive 89/336/EEC

Protection:

Highly water resistant and dust proof housing

Battery Options:

14 hrs on three AA alkaline cells (10 hours with optional motorized pump*)
14 hrs on three AA alkaline cells (10 hours with optional motorized pump*)
18 hrs on rechargeable “hot-swappable” battery pack (13 hrs with optional motorized pump*)
*when equipped with oxygen, combustible, TwinTox and one additional toxic sensor
3 hours charge time.

Size:

5.7 x 2.9 x 1.5 in. / 14.5 x 7.4 x 3.8 cm

Weight:

13.1 oz. / 370 g

WARRANTY:

Full 2-year warranty including all sensors

DATALOGGER OPTIONS:

User-downloadable datalogger

Data recorder:

ll events and occurrences (calibration zero adjustment, calibration span adjustment, gas readings, TWA, STEL, alarm condition, failures detected by the microprocessor)

Sampling rate:

Factory set at 5-second intervals and user-settable from 1 to 127-second intervals

Storage:

2 months of continuous data via 32 MB Flash MMC card (64 MB and 128 MB cards also available); when full, the wrap-around feature replaces oldest data with most recent data


 

 

Location

Ask about this product