You have 0 items in your cart.
TES-Taiwan
TES New
Sub Categories
Category:
Humidity / Temperature Meter
Laboratory Quality Control Air-Conditioning Process Engineering
Category:
Insulation Tester
4000M W /1000V, 4000M W /500V, 4000M W /250V Power lock for 3 minutes (Auto power off) Auto-Zero adjustment Data-Hold-Function
Category:
Lan Cable Tester
Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test all category UTP cables and hardware. Verify end-to-end connectivity per EIA/TIA 568 wiring standard. Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair). Locates wiring/connection errors (distance to the open or shout) Measures cable length Easy to use only : One button to select the test and two lines characters LCD display. Low battery, Auto power off, long battery life (60 hours continuous)
Category:
Battery Impedance Tester
Test Condition Without Shutting Down Battery. Simultaneously Measure Battery Resistance, Voltage. Comparator Function. Rates Conditions as Pass, Warning, or Fail. Memory and Read Function Compact and Lightweight. RS232 PC Interface
Category:
Light Meter
Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0 to 400,000 Lux, 0 to 40, 000 fc. Accurate and Instant response. Data Hold function. MAX/MIN function. Peak Hold function. Relative function. Cosine Angular corrected. Auto-Power-Off function. CNS 5119 class11
Category:
Anemometer
Fast Response Probe. Air Flow Volume. Instant / Avg / 2/3 Vmax Flow Measurement. Velocity m/s, ft/min, knots, km/hr, mph. Temperature & Humidity measurement. Calculate Dew point temperature, Wet bulb temperature, Wind chill temperature, Humidex temperature and Heat index temperature. Data hold & Maximum / Minimum function Manual data memory and read function (10 x 99 sets). LCD triple display. Telescoping probe. USB interface.
Category:
PH Tester
Fast and Easy pH measurement Dual LCD display shows PH/℃& ℉ or mV/ ℃&℉ simultaneously Logging 99 readings
Category:
Power Analyzer
Standby power measurement ( 0 to 100W width 0.001W resolution) Regular power(0~2000W) 100W AC power supply + AC power analyzer] Programmable nominal output (85V to 250V , 45Hz to 65Hz) power quality measurement (W , PF , V , A) PC programmable through RS-232C interface( Optional RS-232C to USB bridge) Programmable Over current protection (OCP) Memory of 99 preset voltage and frequency Standby and Operation Button Back space for easy correction Standby power measurement of note book, desktop PC, LCD TV,...