You have 0 items in your cart.
By Brands
Brands
Category:
S Series
DC up to 50A ● AC up to 50A ● Hz Meter : Measuring Ranges : 45~55 Hz, 45~65 Hz, 55~65 Hz Rated Voltage : 110V, 220V Accuracy : Class 2.0 ● Case and Composition: Acrylic resin front and Bakelite case. Four studs mounting. ● Accuracy : Moving coil type：Class 2.0 Moving lron type：Class 2.5 Rectifier : Class 2.0 ● Color：Black case. white scale plate. ● Pointer：Tube or knife-type, color in black or red
Category:
H.V. Detectors
● Telescopic, compact, lightweight.● High voltage detection.● Self test button feature.● Easy to recognize indication.● High intensity red light emitting diode and intermittent audible sound for easy recognition in full sunlight and noisy environments.● Waterproof.
Category:
Light Meter
FEATURES ● Wide range for measurements up 40000 lux and 4000 fc.● 0.01 lux and 0.001 fc resolution for accurate low light level measurements.● Light sensor cover is included for preserving sensor life.● Auto off function.● Data hold and peak hold function.● Low battery indication.● Over range indication.● Auto-ranged.● Manual-ranged.● Calibration mode is provided.● 9V battery system.● Selection key for lux and fc.● The spectral sensitivity close to CIE photopic curve.● Ideal tool for workplace, clean-room and computer room light testing.● Video, photographic, office, classroom, and architectural uses. SPECIFICATIONS Measuring ranges 39.99 / 399.9 / 3999 / 39990 lux 3.999 / 39.99 / 399.9 / 3999fc Resolution 0.01 lux - 10 lux 0.001 fc - 1 fc Accuracy ±(3%rdg+5dgt) Calibrated to standard incandescent lamp, 2856°K. Display 4000 count LCD Photo sensor Silicon photodiode Operating / storage conditions 0°C - 40°C < 80 % R.H. -10°C - 50°C < 80 % R.H. Dimensions 194(L) x...
Category:
H.V. Probe Meters
● Measures positive polarity DC voltages up to 40kV.● Lightweight and rugged.● 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.● Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.
Category:
Shock
The Shock101 is a high speed, battery powered, stand alone, tri-axial shock data logger. Continuously sampling at 512Hz, this data logger writes the peak acceleration (g force) to memory at the user-specified reading interval. The Shock101 is specifically designed for documenting dynamic environments such as moving vehicles, trucks, containers, and ships. The device also characterizes environments such as production and assembly lines of delicate equipment, IC fabrication, communications and computer components. This is an all-in-one, compact, portable, easy to use device that measures and records data up to 349,525 measurements per axis. The storage medium is non-volatile solid state memory, providing maximum data security should the battery become discharged. Data may be displayed for the three axes, or as calculated vector sums, providing overall acceleration and shock of the equipment or shipment being monitored. MadgeTech software provides a summary of statistics for average, minimum and maximum shock values. The device is available in four ranges ±5g, ±50g, ±100g and ±250g.
Category:
U Series & Thin Edgewise
Case and Composition: Acrylic resin front and Bakelite case. Four studs mounting. ● Accuracy :Class 2.0 ● Color：Black case and white scale plate. ● Pointer：Tube type color in red.
Category:
Circuit Breaker Identifiers
FEATURES ● The 188FFF is a Fuse and Fault Finder which comprises of two parts : The Receiver and the Transmitter.● The Transmitter, draws a current from the mains supply circuit to which it is connected to. The Signal● Current from the Tx is at about 10kHz. The Transmitter is powered by the mains and requires no batteries.● The 10kHz signal current generated by the Transmitter is then searched(sniffed) by the Receiver to detect the Fuse, Circuit Breaker or the faulty circuit.● The Receiver is a tuned circuit which has it's center frequency tuned to about 10kHz. The sensor is located in the tip of the Receiver.● The amplitude of the received signal is shown on a bar-graph type Leds.● The more Leds ON, the stronger the signal.● The Receiver uses one 9V battery. SPECIFICATIONS Receiver Tuner circuit mid frequency 10kHz Bar graph leds 9 Battery indicator led 1 On button 1 Off button 1 Buzzer 1 Auto-off(Min) approx 1 ...
Category:
PATGuard Elite 2
Advanced PAT Software PREMIER PAT SOFTWARE PACKAGE THAT IS IDEAL FOR COMPANIES THAT PAT TEST ON A REGULAR BASIS This PAT software program provides you with quick and easy, complete management of the PAT testing process. Seaward Part No: 352A910