You have 0 items in your cart.
By Brands
Sub Categories
Category:
SCOPECORDERS
Measure and analyze a wealth of signals in real-time and speed up development and fault finding. The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days. Using flexible modular inputs it combines measurements of electrical signals, physical (sensors) and CAN / LIN serial buses and is able to trigger on electrical power related and other calculations in real-time. Localized language brochures are available below in the Specifications tab. What's New - Release of new firmware version 3.11 - July 25,2014
Category:
OPTICAL SPECTRUM ANALYZER
World-Class Optical Performance Wavelength range: 600 to 1700nm High wavelength accuracy: ±0.01nm High wavelength resolution: 0.02nm Wide dynamic range: 78dB typ. Wide level range: +20 to -90dBm Fast measurement: 0.2 sec. (100nm span) Applicable to single-mode and multimode fibers Related Products Optical Wavelength Meter Offers higher Wavelength Accuracy, but reduced span, and sensitivity compared to the AQ6370D OSA
Category:
DIGITAL MULTIMETERS
3.5-digit (6000-count dual display, 31-segment bar graph display), RMS type Measurement Functions: Voltage, Current, Resistance, Continuity Check, Diode Test, Frequency, Capacitance, Temperature Features: Category IV 600V, Category III 1000V, USB Communication function, Closed Case Calibration (User calibration function).
Category:
SOURCE MEASURE UNITS
The GS610 is a highly accurate and highly functional programmable voltage/current source that incorporates voltage/current generation and measurement functions. The maximum output voltage and current are 110 V and 3.2 A, respectively. Evaluation of over a wide range of basic electrical characteristics is possible, because the GS610 can operate as a current source or a current sink.
Category:
HA SERIES
Description： ANEMOMETER Model : AM-4203HA * -P circuit, 0.4 to 25.0 m/s. * Max., Min., Memory recall button. * m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF). * Size : 185 x 78 x 38 mm.
Category:
Ion Meters
Bante320 is a multi-parameter ion meter used for measuring the ion concentration and pH value of liquids. The meter is equipped with a BNC connecter that can connects various combination Ion Selective Electrodes. Features: During the pH mode, Up to 5 points push-button calibration with auto- buffer recognition. Selectable pH buffer standards and temperature units. Automatically calculates and displays electrode slope after calibration. During ORP mode, Single point offset calibration allows user adjusts displayed value to a known standard. Absolute or Relative millivolt (R.mV) measurement provides accurate ORP readings. During the ion mode, 2 to 5 points push-button calibration from low to high concentrations. Selectable multiple concentration units, including ppm, mg/L and mol/L. Direct readout ion concentration simplifies the elaborate measurement process.
Category:
LM-8000 SERIES
Description： Anemometer, Humidity meter Light Meter, Type K Thermometer Model : LM-8000A* Humidity : 10 to 95 %RH,oC/oF * Anemometer : 0.4 to 30.0 m/s. * Anemometer unit : m/s, km/h, MPH, knots, ft/min, oC/oF. * Light : 0 to 20,000 Lux, 0 to 1,680 Ft-cd, auto range. * Type K Thermometer : -100 to 1300 oC, oC/oF. * Data hold, Record (Max., Min.) * Tiny bone shape with light weight and small size.
Category:
CALIBRATORS
Signal source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse Measurement: DCV, DCA, ACV, Resistance, RTD, TC (10 kinds), Frequency, Pulse Features: Simultaneous signal source and measurement capacity, a wide array of useful functions, Easy operation, Online communication function Options: AC adapter (94012: For 100V AC, 94013: For 120V AC, 94016: For 220-240V AC), B9108WA RJ sensor, B9108XA Accessory carrying case, 91017 Communications cable