GW Instek
Sub Categories
Features *DDS Technique and FPGA Chip Design *Frequency Range : 0.1Hz~4/10MHz *High Frequency Accuracy : ± 20ppm *Frequency Resolution : 100mHz *Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz *Front Panel Setting Save/Recall with 10 Groups of Setting Memories *Built-In 9 Digits,150MHz/High Resolution Counter(SFG-2110 Only)*INT/EXT AM/FM Modulation (SFG-2110 Only)*LIN/LOG Sweep Mode(SFG-2110 Only)
Features - Frequency Range: 34.5MHz ~ 4400MHz- Output Power Range: -30dBm ~ 0dBm- Continuous Wave Signal Without any Modulation- Support Fixed Frequency, Frequency Sweep, Frequency Hopping & Power Sweep Mode- -107dBc/Hz Phase Noise @100kHz Offset- Frequency Resolution: 10kHz- PC USB Interface Powered and Controlled- External PC Software Support Different Operating System
Features * 0.1Hz to 5/12/25 MHz with in 0.1Hz Resolution* Sine, Square, Triangular, Noise and Arbitrary Waveform* 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k Point Memory for Arbitrary Waveform * 1% ~ 99% adjustable duty cycle for Square Waveform* Waveform Parameter Setting Through Numeric Keypad Entry & Knob Selection* Amplitude, DC Offset and Other Key Setting Information Shown on the 3.5” LCD Screen Simultaneously* AM/FM/FSK Modulation, Sweep, and Frequency Counter Functions (AFG-2100 only)* USB Device Interface for Remote Control and Waveform Editing* PC Arbitrary Waveform Editing Software
Features - Frequency range: 1uHz~25MHz- 1uHz frequency resolution - Built-in 120 MSa/s, 10 bit resolution and arbitrary waveform editing function with 4k point memory- Dual channel models support coupling, tracking, and phase functions- Square waveform can adjust the duty cycle from 1% to 99%.- Support various arbitrary waveform editing methods.- Built-in AM/FM/PM/FSK/SUM(AFG-225/225P) modulation, sweep and burst functions- USB interface signal control- AFG-125P/225P provide three DC power selections
Features: * Wide Frequency Ranges From 1μHz to 25MHz (sine/square wave) * 1 μHz Resolution in Full Range * Built-in Standard 120MSa/s, 10bit, 4k Points Arbitrary Waveform for Both Channels* True Dual-Channel Output, CH2 Provides the Same Characteristics as CH1* Couple, Tracking, Phase Operations of Dual Channel are Supported* 1% ~ 99% Adjustable Duty Cycle for Square Waveform * High Resolution and Colored TFT LCD with Friendly User Interface * Multiple Editing methods to Edit Arbitrary Waveform Easily * Built-in Standard AM/FM/PM/FSK/SUM/Sweep/Burst and Frequency Counter * USB Host/Device Interface for Remote Control and Waveform Editing
Features * Wide frequency range from 1uHz to 80/50MHz* High 200MSa/s sampling rate * 16-bit Amplitude Resolution* Output from any section of 1M-point-long waveforms* 4.3" high resolution LCD display/on-screen help/Impedance switch* Four ways to generate arbitrary waveforms: Front Panel Operation CSV file uploading, Direct Waveform Reconstruction (DWR), ArbitraryWaveform Editing PC Software * USB, RS-232, GPIB interface support
Features * Designed for wireless frequency range applications * Includes a 880MHz Digital PLL and 2.4GHz microstrip line filter circuits* Include these applications of RF Transmitter and Receiver both * Training for the Voice Communication System * Demonstrates the applications and measurements for using spectrum analyzers in communication instruments * Specific RF circuit characteristics & PCB Layout on each module * Training system covering 22 modules, and over 50 experiments
Features - Baseband Signal : Sine, Triangle, Square wave- Frequency Range: 0.1 ~ 3MHz- RF Frequency : 870 ~ 920MHz- AM & FM Modulation- Mixer & 2.4GHz Bandpass Filter- 5 programmable On/Off Switches and 5 Test Points to Simulate 8 Failure Conditions for Trouble-Shooting Study- USB Interface to Provide Remote Control