Features:
* 100/60/40/25 MHz Bandwidth with 2 Input Channels
* 250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
* 4k Memory Length per Channel
* Peak Detect as Fast as 10ns
* Save/Recall of 15 Front Panel Settings & Waveforms
* 5.6" TFT Color Display
* 19 Auto Measurements
* Arithmetic Operators - Add, Subtract, FFT
* USB Port for PC Connection
Description:
The GDS-1000 Series offers 100MHz, 60MHz, 40MHz and 25MHz digital storage oscilloscopes with 5.6" color TFT LCD displays. With dual sampling modes, a 4000 point record length, a real-time sampling rate of 250MSa/s and an ET sampling rate of 25GSa/s, the GDS-1000 Series DSO provides an excellent balance of performance between memory length and sampling speed. Other major features include user-friendly menu tree operations, compact size, ergonomic design, USB PC connectivity and convenient SD/USB memory card support. The GDS-1000 Series is designed to meet today's most demanding engineering requirements and budgets.
|
|
Specification:
GDS-1022
|
GDS-1042
|
GDS-1062
|
GDS-1102
|
|
VERTICAL | ||||
Channels |
2
|
2
|
2
|
2
|
Bandwidth |
DC ~ 25MHz (-3dB)
|
DC ~ 40MHz (-3dB)
|
DC ~ 60MHz (-3dB)
|
DC ~ 100MHz (-3dB)
|
Rise Time |
<14ns Approx.
|
<8.7ns Approx.
|
<5.8ns Approx.
|
<3.5ns Approx.
|
Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) | |||
Accuracy | ±(3% x |Readout|+0.1 div + 1mV) | |||
Input Coupling | AC, DC & Ground | |||
Input Impedance | 1M±2%, ~16pF | |||
Polarity | Normal & Invert | |||
Maximum Input | 300V (DC+AC peak), CATII | |||
Waveform Signal Process | + , - , FFT | |||
Offset Range |
2mV/div ~ 50mV/div : ±0.4V 100mV/div ~ 500mV/div : ±4V 1V/div ~ 5V/div : ±40V |
|||
Bandwidth Limit | 20MHz (-3dB) | |||
TRIGGER | ||||
Sources | CH1 , CH2 , Line , EXT | |||
Modes | Auto, Normal, Single, TV, Edge, Pulse Width | |||
Coupling | AC , DC , LF rej. , HF rej. , Noise rej. | |||
Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~ 100MHz: Approx. 1.5div or 15mV |
|||
EXT TRIGGER | ||||
Range | ±15V | |||
Sensitivity | DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV | |||
Input Impedance | 1MΩ±2% , ~ 16pF | |||
Maximum Input | 300V (DC AC peak) , CATII | |||
HORIZONTAL | ||||
Range | 1ns/div ~ 10s/div (1-2.5-5 increments); ROLL : 250ms/div ~ 10s/div | |||
Modes | Main, Window, Window Zoom, Roll, X-Y | |||
Accuracy | ±0.01% | |||
Pre-Trigger | 10 div maximum | |||
Post-Trigger | 1000 div | |||
X-Y MODE | ||||
X-Axis Input | Channel 1 | |||
Y-Axis Input | Channel 2 | |||
Phase Shift | ±3° at 100kHz | |||
SIGNAL ACQUISITION | ||||
Real-Time Sample Rate | 250MSa/s maximum | |||
Equivalent Sample Rate | 25GSa/s maximum | |||
Vertical Resolution | 8 Bits | |||
Record Length | 4K Dots maximum | |||
Acquisition Mode | Normal, Peak Detect, Average | |||
Peak Detection | 10ns (500ns/div ~ 10s/div) | |||
Average | 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 | |||
CURSORS AND MEASUREMENT | ||||
Voltage Measurement | Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot | |||
Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle | |||
Cursors Measurement | Voltage difference between cursors (ΔV) Time difference between cursors (ΔT) |
|||
Auto Counter |
Resolution : 6 digits |
|||
CONTROL PANEL FUNCTION | ||||
Autoset | Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level | |||
Save Setup | Up to 15 sets of measurement conditions | |||
Save Waveform | 15 sets of waveform | |||
DISPLAY | ||||
TFT LCD Type | 5.6 inch | |||
Display Resolution | 234 (Vertically) x 320 (Horizontally) Dots | |||
Display Graticule | 8 x 10 divisions | |||
Display Brightness | Adjustable | |||
INTERFACE | ||||
USB Slave Connector | USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) | |||
SD Card Slot | Image (BMP), waveform data (CSV), and setup (SET) | |||
POWER SOURCE | ||||
Line Voltage Range | AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection | |||
MISCELLANEOUS | ||||
Multi-Language Menu | Available | |||
Online Help | Available | |||
DIMENSIONS & WEIGHT | ||||
310(W) x 142(H) x 140(D)mm; Approx. 2.5kg |
Accessories:
User manual x 1, Power Cord x 1
Probe-GTP-060A-4 : 60MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GDS-1022/1042 (one per channel)
Probe-GTP-060A-2 : 60MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GDS-1062 (one per channel)
Probe-GTP-100A-2 : 100MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GDS-1102 (one per channel)
Optional Accessories
GSC-006 Soft carrying case
GTL-110 Test lead, BNC-BNC heads
GTL-242 USB 2.0 A-B type cable
Ordering Information:
GDS-1022 25MHz, 2-channel, Color LCD Display DSO
GDS-1042 40MHz, 2-channel, Color LCD Display DSO
GDS-1062 60MHz, 2-channel, Color LCD Display DSO
GDS-1102 100MHz, 2-channel, Color LCD Display DSO