Makes it simple and easy to discern the layout of a coax network, locate faults on cable runs, identify remotes through splitters, and determine cable length.
Gives you Quick picture of existing cable faults and condition, and shows the distance to shorts or open faults at the same time. Be able to locate cable shorts, and open up to 1000ft.
Conducts cable measurement up to 1500ft of cable.
Locates splitters in the system,and perform splitter quality test to grade splitter performance.
Long Lasting Power
Field work can be really time consuming and tiring, and we understand that it is annoying to find that your device power is out or need to change batteries during the working process. With 4 AA alkaline batteries, the device is capable of more than 20 hours of continuous use.
There are many lighting environments in the field, and we understand that the traditional screen display can be so difficult to view in such environment. With Large backlit LCD display, it is much more easier to navigate your device in all lighting environments.
Specially for Coax System
Could be used to measure coaxial cables, and shows an accurate picture of the coax system layout, locating unlabeled coax systems with up to 4 Coax RF Remotes for wire mapping and up to 12 ID only coax remotes.
Built in tone track function helps you to trace the signal of cables without the need of other extra equipments. With this function you can easily find the cable that you test on among the complex cable systems, save your time for the main issue and acquire better working efficiency.
．Displays cable run quality
．Detects Coax RF Remotes through splitters
．Measures cable length up to 1,500 feet
．Clearly depicts network reading as both a bar graph and a digital return loss number, measured in dB
||Time Domain Reflectometry (TDR)
||• Range : 0 to 1,500 ft (457 meters) min at 15pF/ft length constant
• Accuracy: ±5%±1ft (0.5 m) with correct length constant
• Length Constant Range : 10.0 to 40.0 pF/ft (33 to 131pF/meter)
|Quality (Return Loss)
||0.0 to 60.0 dB
|ID Only Coax Remotes
||100 ohms maximum DC resistance, center conductor plus shield
|Coax RF Remotes
||17dB maximum attenuation to remote location (splitters, cable, etc.)
|Audio Frequency Tone
||• 1,000 and 600 Hz – 4 patterns (High only, Low only, 2 warble tones)
• 3.3Vp-p (pin or shield), 6.6Vp-p (both pin and shield) open circuit
|Radio Frequency Tone
||10, 20, 30 or 40MHz, 1Vrms into 75 ohms
|Approximately 4 volts
||17.3 x 8.0 x 3.3 cm (6.8 x 3.15 x 1.3 inches)
||With batteries: 340 grams (12.0 oz.)
||4 AA alkaline batteries
||Active : 20 hours average
Standby : 4 years
||3,050 meters (10,000ft) maximum
||Operating : 0 to 50°C (32 to 122°F)
Storage : -20 to 60°C (-4 to 140°F)
||10 to 90% non-condensing
||Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 6101B (2003) and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, EMC EN61326-1
||High-strength PC/ABS plastic with V0 rating with boot