You have 0 items in your cart.
Current Clamp DMM Accys
Category:
Current Clamp DMM Accys
Current Range: 6000 A AC Frequency Range: 10 Hz to 7 kHz (-3 dB) Accuracy: +/- 1% of reading (@25 C, 50 Hz) i430-Flexi-TF works with: Fluke 434-II Series II Three-Phase Energy Analyzer Fluke 435-II Series II Three-Phase Power Quality and Energy Analyzer Fluke 437-II Series II 400 Hz Three-Phase Power Quality and Energy Analyzer
Category:
Current Clamp DMM Accys
Expand the use of your Fluke 430 series power quality tool with this 5A ac current clamp Specially configured to provide low current accuracy while taking measurements on secondary current transformers Low level current clamp measures up to 5A ac Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 inches) Take accurate readings without breakings the circuit CAT III 600 V (For insulated conductors only)
Category:
Current Clamp DMM Accys
Low level current clamp measures up to 5 A ac Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 inches) Take accurate readings without breakings the circuit CAT III 600 V (For insulated conductors only)
Category:
Current Clamp DMM Accys
The i6000sflex is an AC current probe utilizing the Rogowski principle It can be used to measure currents up to 6000A when used in conjunction with oscilloscopes, recorders or data loggers The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas Current Ranges: 60A/600A/6000A AC RMS Output Sensitivity (AC coupled): 50 mV /5mV / 0.5mV per A Frequency Range: 10 Hz to 50 kHz (- 3 dB) Load Impedance: 100 kOhm minimum Accuracy (at +25°C): ±1% of range (45–65 Hz) Linearity (10% to 100% of range): ±0.2% of reading
Category:
Current Clamp DMM Accys
The i6000sflex is an AC current probe utilizing the Rogowski principle It can be used to measure currents up to 6000A when used in conjunction with oscilloscopes, recorders or data loggers The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas Current Ranges: 60A/600A/6000A AC RMS Output Sensitivity (AC coupled): 50 mV /5mV / 0.5mV per A Frequency Range: 10 Hz to 50 kHz (- 3 dB) Load Impedance: 100 kOhm minimum Accuracy (at +25°C): ±1% of range (45–65 Hz) Linearity (10% to 100% of range): ±0.2% of reading
Category:
Current Clamp DMM Accys
Measures AC current from 100mA to 800 A rms 30 Hz to 10 kHz frequency range CAT III 600 V rating Accepts up to 54 mm (2.1 in) diameter conductor size 1000:1 conversion factor for easy calculation Rugged positive action design
Category:
Current Clamp DMM Accys
Measuring Range selectable per software:0.01A to 1A0.1A to 10A Peak current for sinusoidal currents:3.7A to 37A Intrinsic error: 0.5% Frequency Range: 40Hz to 10kHz Operating Voltage: 300V CAT IV Phase Error: 0.5° Jaw Opening: <15mm diameter or 15x17mm bus bars Errors in % of measuring range at 23°C ± 2K; 74°F±2K, for 48 to 65Hz Phase angle error at nominal current Imax maximum current without time limit (for ac and dc shunts)
Category:
Current Clamp DMM Accys
Measuring Range selectable per software:0.2 A to 20 A 2 A to 200 A Peak current for sinusoidal currents74 A 300 A Intrinsic error 0.5% Frequency Range 40 Hz to 10 kHz Operating Voltage 300 V CAT IV Phase Error 0.5 ° Jaw Opening < 15 mm diameter or 15 x 17 mm bus bars Errors in % of measuring range at 23 °C ± 2 K; 74 °F ± 2 K, for 48 to 65 Hz Phase angle error at nominal current Imax maximum current without time limit (for ac and dc shunts)