You have 0 items in your cart.
Category:
Particle counters
The reliability you demand at a price you won’t believe! Small Size—Big Performance The handheld GT-321 is a portable particle counter that counts particles down to 0.3 microns—giving you portability and reliability at the lowest price in the industry. Completely Self-Contained—Selectable Particle Sizes Don’t let the size fool you—the GT-321 is completely self-contained with its own internal battery and sample pump, and is programmable, allowing you to choose your particle size of interest from five sizes: 0.3, 0.5, 1.0, 2.0, or 5.0 microns. Fast Sampling Unlike other counters that can take up to a minute to deliver results, the GT-321 starts delivering volumetric concentration results in about 6 seconds! This facilitates quick multi-site sampling, tracing particle sources and site particle trending. Simple Operation Only two front-panel buttons control the size channels and sample cycle. The side-mounted power switch allows for convenient thumb operation. Battery or AC Powered The self-contained battery pack powers the unit for 8 hours of typical intermittent operation, and for up to 5 hours of continuous use. The included AC adapter operates the counter, even...
Category:
Megger
Single- and three-phase transformer testing Fast, easy hand-held operation. Powered by six standard “AA” alkaline batteries; no charger needed. Provides up to 12 hours of field operation. Measures turns ratio range of 10,000:1, with a high accuracy (±0.1%, 0.8 to 2000) at a low excitation voltage Records ratio errors for bushing CTs to an accuracy of±0.1% nameplate. This reduces the need for additional test equipment and improves set-up time. Perfect for meter shops, the TTR20 can be used for inspection purposes to determine the no-load accuracy of most CTs and PTs. It also can be used to determine the need to test potentially faulty CTs and PTs. Automatic self-calibration for each test. Simple, one-button operation Quick-start guide on front panel
Category:
Megger
AC and DC voltage from 6 to 1000 V Resistance / Continuity (acoustically) 0 to 2 kΩ RCD function test Two pole phase sequence indication LCD display CAT IV 1000 V rating Exhausted battery warning indicator Auto power off
Category:
Megger
Full autoranging for measuring the lenght of power, telphony, CATV, and LAN cables, provides distance to an open or short. Extra large, high resolution backlit LCD. Automatic output impedance control of 25, 50, 75, 100, 125, or 150 ohms. User-friendly menu on screen operation. Cable length calibration function. Internal library of 39 standard cable types
Category:
Megger
Backlit graphics monochrome LCD (256 x 128) Adjustable display contrast Resolution to 0.1 m For use on Telecom TNV-3 circuit, or 150V CAT IV power circuits Power blocking filter not required Environmental protection to IP54 2ns pulse for near end fault location AUTO option selecting gain and pulse for each range Display distance in metres or feet Uses five AA (LR6) primary cells
Category:
Megger
Simple Operation Warble Tone Generator Velocity factor from 0.30 to 0.99 Range to 10,000 ft (3 km) Tough ABS case IP54 environmental protection Carry case and test leads included
Category:
Megger
Simple manual or automatic operation 120 V 60 Hz operation User-selectable PASS/FAIL limits Fast test times selectable from 1s Ground bond testing at 25 A, 10 A and 200 mA Differential, touch and substitute ground leakage testing
Category:
Oil testing
Megger OTS80PB Oil Test Kit The Megger OTS80PB Oil Test Kit is one of the lightest, rugged portable 80 kV oil kits on the market. The optional battery powered unit makes the OTS80PB oil tester ideal for on-site use. Check data sheet for ordering information Megger OTS80PB Oil Tester Features Lightest portable instrument for measuring insulating oil breakdown voltage Bright 3.5 inch colour display visable out doors Suitable for mineral, ester and silicon oils Trip detection circuit with direct measurement of voltage and current Optional battery powered kit Megger OTS80PB Oil Test Kit Contents Vessel 400 ml assembly 12 V vehicle charger lead (supplied only on instruments configured with a battery) Magnetic bead stirrers (2 off) Magnetic bead retriever Feeler gauge set 1, 2, 2.5, 2.54 mm User manual Megger OTS80PB Oil Test Kit Optional Accessories Transport case (with wheels) 1001-475 Vessel 400 ml assembly (no electrodes supplied) 1001-473 Vessel 150 ml assembly (no electrodes supplied) 1001-474 VCM100D digital voltage checker 1001-105 VCM80D digital voltage checker 1001-801 Printer paper, 1 roll (MOV applies) (4 rolls...