You have 0 items in your cart.
Category:
Water
This checker can be used for continuous monitoring of the water turbidity (TC-100/500/3000) and suspended solids (TCS-1000) . Analogue output (4-20mA) allows you to use this checker with various equipments. Wiper for easy maintenance Original wiper certainly keeps lenses clean. Stain of lenses need to be checked only once a month. Compact size Simple cylindrical design in compact size approx ¢32 x 170mm (1.26 x 6.69 inch). Requires small space to set up the unit. High durability Durable stainless steel has been used for the sensor casing. Stainless steel = 18-15-2.5 Cr-Ni-Mo low C stainless steel Lenses are made of hard-to-scratch sapphire glass. Turbidity Checker TC-100/500/3000 SS Checker TCS-1000 The transmitter is also available to use in combination with the Turbidity Checker / SS Checker. As well as the turbidity/SS indication, this transmitter can indicate signal output response...
Category:
Water
The transmitter is also available to use in combination with the Turbidity Checker / SS Checker. As well as the turbidity/SS indication, this transmitter can indicate signal output response time, alarm level setting and so on. You can control the turbidity/SS utilizing its functions fully. Power Supply 50/60Hz Signal output Alarm output Degree of protection Jet-proof type (IP65) Transmitter forSuspended Solids Checker
Category:
Water
Easy to measure turbidity. You can easily measure the water turbidity anywhere with this portable sensor because it cannot be affected by external disturbance light. Unnecessary to draw the water. You just put the probe into the water to measure turbidity. You can avoid the hassle of drawing the water. High durability Controller Unit: Waterproof IP67. Anti-bacterial metrical is used. Sensor Unit: Durable SUS316L is used. Optical window is made of sapphire glass. It is equipped with a rubber to absorb the impact from wear and shock. Model No. TD-M500 Measuring Technique Attenuated Light Method Measuring Range 0.0-500FTU Display Resolution 0.1FTU (0.0-99.9), 1FTU (100-500) Calibration Distilled Water or Air Calibration Correction Single or Double Point Correction Power Requirements 9V Layer-built Alkaline Dry Battery (6LR61) Battery Life Approx. 8000 measurements Water Temperature 0 to 40℃ (32 to 104°F) Operating...
Category:
Water
This checker can be used for continuous monitoring of the water turbidity (TC-100/500/3000) and suspended solids (TCS-1000) . Analogue output (4-20mA) allows you to use this checker with various equipments. Wiper for easy maintenance Original wiper certainly keeps lenses clean. Stain of lenses need to be checked only once a month. Compact size Simple cylindrical design in compact size approx ¢32 x 170mm (1.26 x 6.69 inch). Requires small space to set up the unit. High durability Durable stainless steel has been used for the sensor casing. Stainless steel = 18-15-2.5 Cr-Ni-Mo low C stainless steel Lenses are made of hard-to-scratch sapphire glass. Turbidity Checker TC-100/500/3000 SS Checker TCS-1000 The transmitter is also available to use in combination with the Turbidity Checker / SS Checker. As well as the turbidity/SS indication, this transmitter can indicate signal output response...
Category:
Water
90 degree scattered light method Turbidity Checker TSC-10(E) uses a method of 90 degree scattered light as the measuring principle of the world common standard. Built-in wiper cleaning system The built-in wiper cleaning system certainly keeps lenses clean. Sapphire glass of the optical windows The optical windows are made of hard-to-scratch sapphire glass. It enables to scrub the window surface to maintain the Turbidity Checker. Compact design The compact design makes it possible to install easily. Turbidity Checker TSC-10(E) got the Pattern Approval Certificate of the measuring instruments of the People's Republic of China. Model No. TSC-10(E) Measuring range 0.00-500.0 (NTU/FNU) Power supply voltage AC100-240V±10% 50/60Hz Power consumption Nomal:15VA or less, During cleaning:22VA max. Display resoltion 0.01(0.00-19.99), 0.1(20.0-500.0)NTU/FNU Output Signal Output (analog 4-20mA, resistance load of 300 max.) Self-checking Relay Output (non-voltage C-contact capacity 240VAC,...
Category:
Frequency Counter
Cub Frequency Counter The Optoelectronics Cub Frequency Counter is ideal for any two-way communication test application or general purpose frequency measurements. If you're looking for a low cost handheld frequency counter, look no further than the Optoelectronics Cub Frequency Counter. Features 1MHz - 2.8GHz frequency range 9 digit LCD display for better visibility and longer battery life 6 hour discharge time from full charge 8 selectable gate times High speed .0001 second gate time 1MHz - 250MHz direct count capability for high resolution Patented Digital Filter eliminates false counts Patented Auto Capture locks frequency displayed until cleared Direct and Pre-scaled ranges Standard BNC antenna connection 3.7"high x 2.75"wide x 1.2"deep All metal casing 1 year parts and labor warranty Supplied with NiCads and power supply
Category:
Manometer/Differential pressure meters
• Gage, Absolute and Differential Pressure Models • MIN/MAX, Hold and Averaging Modes (HHP242 only) • 8 User Selectable Engineering Units • User Activated Back Light • Auto Shutoff After 20 Minutes of Keypad Inactivity • 0 to 100% Horizontal Bargraph This delivers precision pressure measurement for field, plant or lab use. Two models are available. The low cost HHP241 with 0.25% FS accuracy, including temperature effects, or the HHP242 with 0.1% FS accuracy. The HHP242 series also have MIN/MAX, Hold and Display Averaging Modes. Both units are available in differential, gage or absolute pressure ranges. SPECIFICATIONS Accuracy: HHP241V2:±0.25% FS HHP242V2:±0.1% FS Storage Temperature:-10 to 50°C (14 to 122°F) Operating Temperature:-40 to 60°C (-40 to 140°F) Temperature Effects:No temperature effect over the entire operating range Engineering Units:8 user selectable (InH2O, mmH2O, mmHg, InHg, kPa,mBar, bar and psi) Proof Pressure:3x full scale or 14 bar (200 psi) whichever is less (high side only on...
Category:
Manometer/Differential pressure meters
• Gage, Absolute and Differential Pressure Models • MIN/MAX, Hold and Averaging Modes (HHP242 only) • 8 User Selectable Engineering Units • User Activated Back Light • Auto Shutoff After 20 Minutes of Keypad Inactivity • 0 to 100% Horizontal Bargraph This delivers precision pressure measurement for field, plant or lab use. Two models are available. The low cost HHP241 with 0.25% FS accuracy, including temperature effects, or the HHP242 with 0.1% FS accuracy. The HHP242 series also have MIN/MAX, Hold and Display Averaging Modes. Both units are available in differential, gage or absolute pressure ranges. SPECIFICATIONS Accuracy: HHP241V2:±0.25% FS HHP242V2:±0.1% FS Storage Temperature:-10 to 50°C (14 to 122°F) Operating Temperature:-40 to 60°C (-40 to 140°F) Temperature Effects:No temperature effect over the entire operating range Engineering Units:8 user selectable (InH2O, mmH2O, mmHg, InHg, kPa,mBar, bar and psi) Proof Pressure:3x full scale or 14 bar (200 psi) whichever is less (high side only on...