Sub Categories
The thermometer is a non-contact infrared thermometer. It can measure from -60 to 550 ℃ (-76~1022 ºF) in the distance of 75:1 DS (Distance to Spot) ratio There are many mathematical modes for the Infrared function
Features - Waveform Support :* Sine Wave: 0.1 ~ 3MHz* Square Wave: 0.1 ~ 3MHz* Triangle Wave: 0.1 ~ 3MHz- RF Frequency : 870 ~ 920MHz- AM Modulation & FM Modulation- 5 On/Off Switches and 5 Test Points to Simulate 8 Failure Conditions for Trouble-Shooting Study- USB Interface to Provide Remote Control
The MT220 can measure pressure with outstanding accuracy, high resolution, minimal tempco, and excellent stability. It offers a wealth of functions for field calibration, including transmitter output measurement (DCV/DCA functions), 24-V DC output, percent error readout, measurement data memory, and Ni-Cd battery operation. The D/A conversion output makes it simple to output data to a recorder or other equipment. And of course, data output through a GP-IB or RS-232 interface is also possible-including data output during operation on a 12 V DC power supply or Ni-Cd batteries.
Improves heat transfer in surface probes Maximum temperature: 260 ° C
We have evolved from the stooping position, so why use a measuring tool with a distance display down by the wheel? Get fast, accurate measurements for on-site Linear, Area and Volume estimates. Built-in functions automatically calculate and store Square Footage, Volume and more for up to nine different areas. Works in and converts in all U.S. and Metric units. Weighs just 3 lbs. – includes convenient kickstand, wrist strap and easy-to-understand User's Guide. It helps you solve: Calculate and store Linear and Area measurements. Roll and label the "Length" and "Width" to find Area, or store and recall later. Stores multiple units of measurement. Works in and converts between Feet-Inches, Decimal Feet, Decimal Inches, Yards and Acres. Built-in user Memory for accumulating counts of measurements. For:Contractors, Estimators, Engineers, Landscapers, Paving Contractors, Fencing Specialists, Real Estate Pros, Utility Personnel, Surveyors, Police Work, Facility Engineers, Telecommunications Contractors Calculates and stores Linear distances, square Area, and cubic Volume measurements. Roll and label the "Length" and "Width" to find an Area or store and recall...
DA-50 detects various combustible & toxic gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. DA-50 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more comprehensive. DA-50 provides RS-485 communication signal and gas leakage alarm signal by relay contact output. Besides, DA-50 has DC 4-20mA standard output which realizes max 2,500m long distance output signal transmission from sensor to receiver and RS-485 communication signal which realizes max 1000m long distance signal transmission.
*Economical. The Master-α, T, H series and ATC-20 are equipped with Automatic Temperature Compensation (ATC), which ensures accurate measurements despite differences in the ambient or sample's temperature. *The MASTER-50H, MASTER-80H, MASTER-93H, MASTER-100H are suitable for samples that are at a high-temperature or samples that contain acidic or corrosive ingredients.
We optimized the cost to sell for less but never wanted to sacrifice any performance. The new CENTER 20 is built on quality. It is robust and reliable. The basic clamp meter functions with AC current measurement are more than proficient for most of general electricians or equipment installers in the field. Also, it’s rated 600V CAT III, it is safe to use.