BANTE 810 Standard Dissolved Oxygen Meter

Bante810 dissolved oxygen meter uses a polarographic sensor

to measures dissolved oxygen concentration or percent

saturation in water. The meter suitable for range of applications

including the river monitoring, fisheries monitoring, etc.

 

Features:

1 or 2 points auto-calibration (100% in saturated air or air-saturated

    water, 0% in zero oxygen solution).

Manual salinity and barometric pressure compensation.

Selectable readout in ppm, mg/L or % saturation.

Selectable either temperature units between degrees Celsius (°C)

    and degrees Fahrenheit (°F).

Automatic Temperature Compensation (ATC) ensures high accuracy

    of measurements.

Manual temperature calibration provides accurate temperature value.

Automatic endpoint function freezes the stable measured values for

    easy reading and recording data.

Help message as a operational guide to helps you understand how

    to use meter.

       

Setup menu lets user customizes calibration points, temperature units,

      automatic or manual hold function, auto-off feature to meet personal

    preferences.

Reset function can resumes all settings to factory default values.

 

Specifications:      
     Model   Bante810      
   Dissolved Oxygen Range   0.0~20.0mg/L
   Dissolved Oxygen Accuracy   ±0.5mg/L (Calibration and measurement under the conditions of same temperature)
   % Saturation of Oxygen   0.0~200.0%
   Accuracy   ±10%
   Temperature Range   0.0~50.0°C, 32.0~122.0°F
   Temperature Accuracy   ±0.5°C
   Temperature Compensation   0~40°C, 32~104°F
   Temperature Calibration   Manual
   Salinity Correction   0~35g/L
   Barometric Pressure Correction   60.0~112.5kPa, 450~850mmHg
   Auto-Off   Manual or Automatic (180 minutes after last key pressed)
   Hold Function   Manual or Automatic
   Reset Function   Yes
   Sensor Type   Polarographic Sensor (Order Code: DO100)
   LCD Display   Custom Dual-Display LCD (135×75mm)
   Power Requirements   DC9V, using AC adapters, 220VAC/50Hz
   Dimensions   210(L)×205(W)×75(H)mm
   Weight   1.2kg
 
  Order Code and Accessories:  
     Order Code   Accessories  
     Bante810   

Dissolved Oxygen Probe (Made in US, Cable length is 2.5 metres)

Electrolyte Solution

Membrane Cap Kit

DC9V Power Adapters

Location

Ask about this product