Sub Categories
- Large LCD 6 digits with backlit. - Measuring by the output of red visible-spectrum light. - Measurement distance: 40~500mm. - Memory of 200 data. - USB datalogger up to 30,000 data (TM-4100D).
Material: Nylon● Red and black each (set)● Removable cap for attaching alligator clips● Press can be used with all sew 4mm jack test leads● Rating : EN 61010-031:2002 + A1:2008 CAT IV 1000V 0.5A / CAT IV 690V 2A CAT IV 500V 10A / CAT IV 250V 10A
- Dataloggin, Quick-response capacitance sensor, accurate measurement for wet bulb globe temperature(WBGT), black globe temperature(TG), humidity(%RH), air temperature(TA), wet bulb(WET) and dew point(DEW). - Max/Min and data hold. - Low battery indication. - LCD display with LED backlight. - Viewing data records. - Switch the temperature unit to ℃ or ℉. - Brass black ball in 50mm diameter. - WBGT alarm setting. - Auto power off with disable function. - Data logging capacity: 12000 records, USB PC serial interface (TM-188D). - Sampling interval: Max 24 hours; Min 1 Second (TM-188D).
Features: ※ Wide Test Frequency 20Hz ~ 10/5/1MHz ※ 0.1% Basic Accuracy & 6 Digits Measurement Resolution ※ Large LCD Display with Intuitive Interface※ Full Measuring Functions with DUT V/I Monitor※ PASS/FAIL Function ( abs, % or delta) with Judgment Alarm※ DC Resistance Measurement ※ Multiple Step Mode※ Standard RS-232C/GPIB Interface※ Optional DC Bias box
600 A ac current measurement with fixed jaw 600 V ac and dc voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement to 6000Ω with continuity detection 1000 µF capacitance measurement State of the art signal processing allows for use in noisy electrical environments while providing stable readings Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement CAT IV 300 V, CAT III 600 V safety rating
High Resolution DC/AC 10mA 23 mm Large Jaw Diameter One Touch Zero for DCA adjustment
Designed for oil refinery Batch continuous analysis of flash point of petroleum products such as light gas oil, kerosene and gasoline Best suited for management of plant and product control Explosion-proof TIIS d2G4 certified Meas. range 0 - 100 degrees C
FEATURES ● Microprocessor-controlled.● Measure down to 1μΩ.● 6 ranges from 2.000mΩ to 200.0Ω.● Maximum resolution of 1μΩ.● Three test currents with over-temperature protection.● Four terminal measurement.● Protection against inadvertent connection to over- voltage. (crow bars for current and voltage)● Clear & large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave™ Inside.● EnerSave™ Auto-hold.● EnerSave™ Auto-off.● Rechargeable battery operated● Robust & compact.● Indicators show if reading may be invalid (RP, RC, and temperature).● "O-Ring” sealed case. SPECIFICATIONS Low resistance ranges / resolution 0-2.000mΩ / 1μΩ 0-20.00mΩ / 10μΩ 0-200.0mΩ / 100μΩ 0-2.000Ω / 1mΩ 0-20.00Ω / 10mΩ 0-200.0Ω / 100mΩ Accuracy 0-2.000mΩ : ±(5%rdg+5dgt) 0-20.00mΩ : ±(4%rdg+4dgt) 0-200.0mΩ : ±(4%rdg+4dgt) 0-2.000Ω : ±(3%rdg+4dgt) 0-20.00Ω : ±(2%rdg+4dgt) 0-200.0Ω : ±(2%rdg+4dgt) Test current (dc) 2.000mΩ to 200.0mΩ :...