You have 0 items in your cart.
SEW-Taiwan
SEW New
Sub Categories
FEATURES ● Microprocessor-controlled.● Measures Insulation Resistance, voltage (AC-DC) measurements with automatic hold facility, diode, ohm, and continuity with a short circuit current of minimum 220mA.● Auto-off function.● Energy conservation feature.● Ener-Save™ limit the test duration to about 10 Seconds.● Quick Test and EnerSave™ are unique features. Both saves energy.● No moving parts. All calibration are saved internally in a non volatile memory.● Easy calibration at any facility around the world.● Operates with rechargeable batteries, alkaline or low cost general purpose batteries.● Low cost maintenance, calibration, and ownership.● Complies to all the latest regulations, including UK. SPECIFICATIONS Insulation Test Test voltage (DC V) and Measuring ranges 250V / 0.2M~2GΩ 500V / 0.2M-4GΩ 1000V / 0.2M-8GΩ Output voltage @ 1mA Rated test Voltage +10% Max Accuracy 0.2M~4GΩ : ±3%rdg 4GΩ~8GΩ : ±5%rdg When voltage is constant, Current is limited at ...
Category:
Test Leads
Wire : PVC UL 1803 / 18AWG. length : 1100±30mm Out diameter : 4.0mm Temperature tolerance range : -40ºC~105ºC Braid copper wires : 170 / 0.08mm● Terminal : 105º angle 4mm brass banana plug (nickel plated) with caged and insulated sheathing to avoid the brass oxidation.● Rating : EN 61010-031:2002 + A1:2008 CAT III 1000V 10A / CAT IV 600V 10A
Category:
Phase Sequence Indicators (Contact Type)
FEATURES ● Indicates phase rotation. ● Indicates phase presence.● No battery required.● Phase rotation phase presence indicated on large liquid crystal display.● Small, rugged enclosure.● Color coded test leads.● Phase presence indication from as low as 40Vac to as high as 500Vac.● Fused.● Lightweight, robust and compact.● EN 61010-1 CAT III 500V EN 61010-2-032 SPECIFICATIONS ELECTRICAL Determination of the Phase Presence Nominal Voltage for Phase Presence Indication (the voltage required for the LCD L1, L2, L3 indicators to come on) From 40Vac to 500Vac. Frequency range From 15Hz to 400Hz. Determination of the Phases Rotary Field Direction: Direction Indication by LCD Display(the voltage required to have the LCD Direction Arrows to indicates and the L1 L2 L3 or L3 L2 L1 indicators to show) From 40 to 500Vac. Frequency range From 15 Hz to 400Hz Protection Over load 700V(between...
Category:
Analogue (1kV below) Insulation Testers
FEATURES ● High quality Taut Band movement.● Three insulation test voltages(DC) : 250V, 500V, 1000V.● Two continuity test on low ohms : 3Ω & 500Ω.● Compact and lightweight.● 200mA continuity short circuit current.● 1mA test current on insulation test at nominal voltage.● Automatic discharge of capacitive and inductive circuit with charge stored in the circuit under test.● Live warning and display or external voltage presence.● Fuse, air gap, crowbar and overload protected.● On line battery monitoring shows if battery is ok.● Manual zero ohm adjustment.● Low battery consumption.● Mirror scale.● Push and turn locking switch for continuous and hand free testing.● BS 16 edition. SPECIFICATIONS Insulation Resistance Test voltage (DC V) 250V / 500V / 1000V Output voltage on open circuit Rated test voltage +10% Measuring ranges 0-100MΩ / 0-200MΩ / 0-400MΩ Mid-scale value 1MΩ / ...
Category:
AC/DC Clamp Meters
FEATURES ● 4000 - count LCD.● Full automatic measurement. ◎ Voltage measurement. ◎ Current measurement. ◎ Resistor measurement. ◎ Capacitor measurement ◎ Frequency counter.● Range change function.● Data Hold function freezes the reading.● Continuity check.● Diode measurement.● Low battery indication.● Auto Power Off (APO) function.● Safety design throughout with no exposed metal parts, shielded banana plugs and recessed input terminals. SPECIFICATIONS AC A 400.0/2000A (40~500Hz) 0~1500A ±(1.5%rdg+4dgt) 1500A~2000A ±(2.5%rdg+4dgt) AC V 400.0mV ±(2.0%rdg+3dgt) 4.000/40.00/400.0/750V ±(1.5%rdg+3dgt) 40~500Hz DC A 400.0/2000A 0~1500A ±(1.5%rdg+4dgt) 1500A~2000A ±(2.5%rdg+4dgt) DC V 400.0mV/4.000/40.00/400.0/1000V...
FEATURES ● Microprocessor-controlled.● Telecommunication test voltage : 50V and 100V.● Large range of insulation test voltages: 50, 100, 125, 250, 500, 1000V.● Mov / protection devices test.● Gas Arrester function.● Automatic voltmeter AC/DC at Start/Reset.● Test ON-OFF.● Battery test.● Safety voltmeter before each test.● Auto-discharge on all test and all ranges.● Battery test at Switch ON-TEST.● Smart hold & Stop on voltmeter AC/DC.● eads AUTO-NULL Key.● Test Auto-stop.● Auto range.● Ener-Save™. SPECIFICATIONS Insulation Resistance Test voltage (DC) and Measuring ranges 50V / 0.1MΩ~400MΩ 100V / 0.1MΩ~800MΩ 125V / 0.1MΩ~1GΩ 250V / 0.2M~2GΩ 500V / 0.2MΩ~4GΩ 1000V / 0.2M~8GΩ Output voltage @ 1mA Rated test Voltage +10% Accuracy 0.1MΩ~4GΩ : ±3%rdg 4MΩ~8GΩ : ±5%rdg Nominal voltage rated 1mA Short circuit current 1.2mA Polarization index(PI) ˇ Detective absorption ratio (DAR) ˇ Continuity Ranges 0.01~100Ω / 100 ~300Ω / 300~1999Ω ...
Category:
Test Leads
The spring-shrouded 4mm brass caged banana probe tip.● Double insulated silicone wire 1m.● Safety straight input plug.● Rating : EN 61010-31:2002 + A1:2008 CAT III 1000V 10A AL-30R Red, AL-30B Black, AL-30G Green● AL-30F It is the fused version for AL-30. Fuse size : 6x32mm Rating : EN 61010-031:2002 + A1:2008 CAT III 250V 10A / 500V 10A / 690V 2A AL-30FR Red, AL-30FB Black