This Window Tint Meter is a hand held device that measures the amount of light that passes through a window. It measures the total amount of Visual Light Transmission (VLT) through a window and any coating (tint film) on that window. This is designed to measure the total VLT of a window after it has been treated with after market window film. The device slides over a partially rolled down window, does its calculations, and in seconds displays the readings on the LCD. Additional features includes continous measuring mode and it has its own internal light source, so the meter will work day or night. Applicable to measure the transmittance or haze of all kinds of transparent, translucent samples with parallel plane (such as automobile manufacturing, aerospace, glass products, plastic sheet, sheet, etc). Also can be used to determine the turbidity or clarity of liquid sample (water, drinks and so on). Features: Digital display, wide measurement range, high resolution Accurate & reliable reading results One key calibration, easy to use. Solid structure, small volume, light weight, exquisite, easy to carry Continuous measuring mode Can connect with PC...
Its a measuring instrument for measuring light permeability of all transparent and semitransparent materials such as glass, plexiglass, plastic, foil etc. The Window Tint Meter measures the total amount of VisualLight Transmission (henceforth referred to as VLT) through a window and any coatings (tint film) on that window after it has been treated with aftermarket window film. With the optional RS-232 interface the results of measurement can be transferred to your PC or notebook. It also has an autocalibrationfunction for optimum results of measurement. Just slide down over a partially rolled down window and in seconds readings are displayed instantly on the LCD. And because it has its own internal light scource, the meter will work day or night. Measure the light permeability of a car or vehicle side and rear windows as well as the different glass products like windows and doors. With this equipment it recognizes whether the applied tint film at the back window or at the side windows are efficient. In addition, you'll know if the film applied abides the rules and regulations of the road in...
The new R series Conductivity meters are designed for high performance with easy operation along with 2 models to choose from depending upon your requirements. Measure Conductivity, Resistivity, Salinity, Concentration, and Temperature with option for ambient temperature and humidity.
-CM-31PW for Pure Water -Specfic Resistivity indicated by reciprocal calc. -1000 point data memory -LCD display for all parameters -Data print-out capability -Automatic Time interval Measurement -Water proof housing -Data hold function and auto power off -Rugged probe design for field measurement
1.Introduction: Digital LCD Viscometer, applies stepping motor based on 16-bytes microcomputer processor, with blue screen TFL-LCD. with even rotate speed, distinctive keystrokes, programming, and alarming system, and also it’s easy to use. Displayer tells directly viscosity, rotary speed, temperature, centesimal torsion, serial number of the spindle and maxim viscosity that can be measured at present rotary speed of the spindle used. Master control board and Subdivides the actuation board completely to use pastes the piece technique. The circuit is designed by the most advanced microcomputer processor in the world, thus the structure is reasonable and compact. The full scale and levels of lineal measure are measured and adjusted through a PC interface, whose measuring capability is up to the advanced standards of similar types abroad. 2.Specification: Display: English Power supply: AC110V-AC220VMeasuring Range cp(mPa·s): 1-2000k(mPa·s)Speed Range(RPM): 0.3RPM 0.6RPM 1.5RPM 3RPM 6RPM 12 RPM 30 RPM 60 RPM(Have no wheel gear arouse)Number of Spindles :4 kinds(The 0th rotor for select and match)Accuracy:...
Style Voltage 110 V±10%; 220 V±10% Frequency 60 Hz±10%; 50 Hz±10% Measurement Range 1-1×105mPa·s Rotor Specification 1#,2#,3#,4#,four kind rotors(You can determine viscosity as low as o.1mPa·s with 0#rotor, need another $100) Measurement Error ±2%(Newton liquid) Rotor Velocity 6 rpm, 12 rpm, 30 rpm, and 60 rpm(automatic) Ambient Temperature 5°C-35°C Relation Humidity ≤ 80% Dimensions 370 mm × 325 mm × 280 mm Net Weight 6.8 kg Warranty One year
Large, easy-to-read dual LCD displays Humidity and Temperature. 3%RH humidity accuracy. Calibration available on site. Desk or wall mount. MAX/MIN value monitor. Audible and visual alarms, with adjustable set points, warns if limits are exceeded. 31 Hygro Thermometer (With Alarm) This is our proposed full time environmental monitoring system. Its detachable probe and can be verify or calibrated through optional signal extending cable and our standard calibration cell. Monitoring limit can be set to this unit. Once the environment condition is out of the setup condition, the unit will send the warning with buzzing and blinking display. Features: Large, easy-to-read dual LCD displays Humidity and Temperature. 3%RH humidity accuracy. Calibration available on site. Desk or wall mount. MAX/MIN value monitor. Audible and visual alarms, with adjustable set points, warns if limits are exceeded.
Triple Display. Clock Function. USB Interface. With Windows Software. 16,000 Records Data logger. Resolution 0.1ºC, 0.1ºF.