Yokogawa’s Portable and Handheld Instruments offer a broad range of portable test equipment to fulfill numerous short-term or continuous measurement application requirements. Included in our wide range of products are: Calibrators, DMM, Clamp-on Testers, Portable Power Monitors, Portable Data Loggers, Insulation Testers, Thermometers, Portable Analog meters, Light Meters, Precision Measuring equipment, and more.
PORTABLE AND HANDHELD INSTRUMENTS
Sub Categories
Laboratory-grade accuracy ±0.03 to ±0.05% Quick readout without error Excellent long-term stability: The resistance elements are made of selected manganin wire, stabilized by both artificial and natural aging after being wound. Perfect guard system Stable measurement: The dial switches offer low contact resistance and little change due to aging, giving stable operation. Inner/outer contact type plugs are used for changing the multiplication factor, assuring little change in the resistance due to reinsertion of plugs. Built-in standard resistors Bar resistor measurement
Model 2755 measures resistances from 1 Ω to 10 MΩ by operation of dials and switches. Batteries and a galvanometer are self-contained. The front control panel is provided with power and galvanometer circuit selectors, one ratio arm, and four measuring dials. Model 2755 is also equipped with a Murray and Varley Loop Tester for convenient location of line faults such as "shorts" and "grounds" in power, telephone, telegraph, and signal cables. No auxiliary attachment required Galvanometer with a built-in protection circuit Compact, lightweight (2 kg) Built-in Murray & Varley loop tester
Model 2769 is a compact, portable Kelvin double bridge designed for measuring low resistance from 0.1 ohm to 110 ohm with four multiplication plugs and one measuring dial. It has built-in standard resistors, bridge power source and high-sensitivity taut-band suspension system electronic DC galvanometer.
A world first in data loggers! We are the first to obtain IPv6 Ready Logo Phase-1(ID:01-000273).Portable size (155×155×55mm) and lightweight (approx. 800g) lets you carry with one hand.Use of a color TFT LCD with wide viewing angle.
Leakage current measurement range from 3mA to 60A Diameter of measurable conductor: 40 mm max. Easier and clear display
This device allows the user to make safe current checks of 4 to 20mA without breaking the loop. In addition, the output function provides a simple way to log and monitor the data. 0.2% Accuracy, 0.01mA Resolution Dual Display LED Torch Light, Backlight Display Analog Output Available
AC/DC current measurements with current ranges up to 300A 24mm in diameter of measurable conductor Light weight & compact design Mean value display Sleep function Approved for comformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)
The CW10 is more like a tester type rather than a recorder, which can measure single phase AC and DC Power, Voltage, Currents, Power Factor, Frequency, Harmonics. It will also contribute to workers maintenance of not only consuming equipment but equipment for renewable energy such as solar and wind power generation.