You have 0 items in your cart.
Programmable Linear D.C. Power Supply
Category:
Programmable Linear D.C. Power Supply
Features: Easy Operation with UP/DOWN Key High Resolution: 10mV, 1mA Over Voltage Protection, Over Current Protection by Hardware 100 Sets of Memory Self Test and Software Calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Time Setting FRONT/REAR Output and Sense Switch Selectable IEEE-488.2 and SCPI Compatible Command set Labview Driver Software High Stability, Low Drift 4 Digit Display
Category:
Programmable Linear D.C. Power Supply
Features: Easy operation with UP/DOWN key High resolution: 10mV, 1mA Over voltage protection, over current protection by software 50 Sets memory Self test and software calibration Meets UL, CSA, IEC safety regulation Auto step running with timer setting Triple output Auto tracking RS-232 communication High stability,low drift 4 digit display
Category:
Programmable Linear D.C. Power Supply
Features: -Dual Range Output (0~15V/0~3A) or (0~9V/0~5A)-3.5 Inch TFT LCD Display-Constant Voltage and Constant Current Operation-Built-in DVM Measurement Function-High Measurement REsolution (1mV/0.1mA for 5A Range);(1mV/0.1uA for 5mA Range)-EXternal Relay Control Output On/Off-Sink Current Capability (Maximum:2A)-Digital Panel Control-Selectable Output and Input (DVM) Ports From Front or Rear Panel-Key Lock Function-5 Sets of Preset Memory Including Power Output ON/OFF States-High Speed Transient Recovery Time(<40us within 100mV ; <80us within 20mV)-OVP/OCP/OTP Protection to Prevent DUT Damage -Standard Multiple Interfaces: USB / LAN /GPIB-Labview Driver and PC Remote Control Software
Category:
Programmable Linear D.C. Power Supply
Features: Easy operation with UP/DOWN key High Resolution: 10mV, 1mA Over voltage protection, over current protection by hardware 50 Sets memory Self test and software calibration Meets UL CSA IEC Safety Regulation Auto Step Running With Timer Setting FRONT/REAR Output and Sense Switch Selectable Triple Output Auto Series and Parallel Operation Auto Tracking IEEE-488.2 and SCPI Compatible Command set Labview Driver Software Available High Stability, Low Drift 4 Digit Display
Category:
Programmable Linear D.C. Power Supply
Features:Digitized programmable interfacehigh resolution 10mV, 1mA 192 x 128 LCD display, simultaneously Over-voltage, over-current, over temperature protection Intelligent fan control (changes by output power) 100 Sets memory Auto step running with timer Provided auto series and parallel function Labview driver Standard interface: RS-232C Optional: GPIB (IEEE-488.2) Optional European jack type terminal
Category:
Programmable Linear D.C. Power Supply
Features: Digitized Programmable Interface High Resolution 10mV, 1mA High Stability, Low Drift Over-Voltage, Over-Current, Over Temperature Protection Intelligent Fan Control (Changes by Output Power) Built-in Buzzer Alarm Labview Driver Standard Interface: RS-232C Optional Interface: GPIB (IEEE-488.2) Optional European Jack Type Terminal
Category:
Programmable Linear D.C. Power Supply
Features: Single Output Dual Range Max. 200WHigh resolution: 1mV/1mA0.01% load/line regulation, 350uVrms rippleAuto step runing with timer setting and 100 Sets memorySafety design: OVP,OCP & OTP;Output ON/OFF controlSelf-test and software calibrationHighly visible vacuum-fluorescent displayFront and rear output terminalStandard interface : RS-232C, GPIBOption : European Jack Type Terminal
Category:
Programmable Linear D.C. Power Supply
Features: 2/3/4 Independent Isolated Output4 LED Display Sets: 3 digits after decimal point Minimum Resolution : 1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S)100mV/10mA(GPD-3303D)Digital panel control(rotary encoder Switch, rubber key with indicator) User-friendly operation, coarse/fine volume control 4 Sets Save/Recall Key-Lock Output on/off Tracking Series and Parallel mode Smart cooling fan achieving low noise USB Standard InterfacePC Software & USB Driver Labview driver