GW Instek
Sub Categories
Features: 4 Independent Isolated Output Four "3 Digits" LED Displays 0.01% Load and Line Regulation Low Ripple and Noise Tracking Operation and Auto Series/Parallel Operation Output ON/OFF Switch Output Voltage and Current Setting When Output Disable Fan Speed Control Circuit to Minimize Fan Noise Over Load and Reverse Polarity Protection Optional European Jack Type Terminal
Features: 2/3/4 Independent Isolated Output4 LED Display Sets: 3 digits after decimal point Minimum Resolution : 1mV/1mA(GPD-2303D/GPD-3303S/GPD-4303S)100mV/10mA(GPD-3303D)Digital panel control(rotary encoder Switch, rubber key with indicator) User-friendly operation, coarse/fine volume control 4 Sets Save/Recall Key-Lock Output on/off Tracking Series and Parallel mode Smart cooling fan achieving low noise USB Standard InterfacePC Software & USB Driver Labview driver
Features ※ 50000 Counts Display ※ Multi-Function ACV,DCV,ACA,DCA,R,C,Hz,Continuity Beeper,Diode Test,Max/Min,REL,Auto Hold,dBm※ Compare Function※ Dual Display Indicate ACV and Hz,DCV(ACV) and dBm※ DCV and ACV Ripple ※ Manual or Auto Ranging ※ 0.02% DCV Accuracy ※ ACV Measuring Frequency Up to 100kHz ※ 20A Current Range With High Energy Fuse Protection ※ Auto-Recall Settings upon Power ON ※ AC True RMS or AC + DC True RMS ※ RS-232C Interface ※ Option: GPIB Interface
Features * 32/16 Input Channel * Time Analysis : Up to 200MHz Internal Sampling Rate * State Analysis : Up to 100MHz External Input Clock * Memory Depth : Up to 2Mbits/1Mbits (Half/Full Channels) * Enable Qualifier : High/Low Level Enable and Enable Delay Function * Signal Analyzer : I2C, RS-232C Protocol Analyzer and Signal Statistics * File Export : Signal Data, Operation Setting and Display Image * USB 2.0 Supported(1.1 Compatible)
Features Max. Current 3AFor: GPR-U/H/M Series,GPC/GPS/PPE/PPS/PPT/PSS/PST-Series
Features: Single Output Dual Range Max. 200WHigh resolution: 1mV/1mA0.01% load/line regulation, 350uVrms rippleAuto step runing with timer setting and 100 Sets memorySafety design: OVP,OCP & OTP;Output ON/OFF controlSelf-test and software calibrationHighly visible vacuum-fluorescent displayFront and rear output terminalStandard interface : RS-232C, GPIBOption : European Jack Type Terminal
Features: Digitized Programmable Interface High Resolution 10mV, 1mA High Stability, Low Drift Over-Voltage, Over-Current, Over Temperature Protection Intelligent Fan Control (Changes by Output Power) Built-in Buzzer Alarm Labview Driver Standard Interface: RS-232C Optional Interface: GPIB (IEEE-488.2) Optional European Jack Type Terminal
Features:Digitized programmable interfacehigh resolution 10mV, 1mA 192 x 128 LCD display, simultaneously Over-voltage, over-current, over temperature protection Intelligent fan control (changes by output power) 100 Sets memory Auto step running with timer Provided auto series and parallel function Labview driver Standard interface: RS-232C Optional: GPIB (IEEE-488.2) Optional European jack type terminal