Measure and Monitor AC,DC,Power kwh with KKI clamp meters now!
Clamp meters
Sub Categories
All kinds of Taiwanese Clamp meters. Latest range.
True RMS 3000A Voltage Measurement (AFLEX 3002 only) Fast Peak Function(30 μs) MAX/MIN Auto-Power-Off:30 minutes Flexible probe, different from normal clamp meter, can pass through obstacles at will and wind many conducting wires simultaneously, max. diameter 170mm AC Current (45~65Hz,True RMS) Range Range Resolution Accuracy of Readings 30 - 300 A 0.00 - 300A 0.1A 1% of range 300 - 999.9 A 100.0 - 999.9 A 0.1A 1% of range 1000 - 3000A 1000 - 3000 A 1A 1% of range AC Voltage (AFLEX 3002 only, 45~65Hz, True RMS) Range Resolution Accuracy of Readings 3 V - 600 V 0.1V ± 0.5% ± 5dgts General Specification Connector Diameter 23mm Cable Diameter 14mm Cable Length from Probe to Box 170mm Conductor Size 170mm (approx.) Battery Type 1.5V SUM-3*2 Power Consumption 10mA (approx.) Auto - Power - Off 30 minutes LCD update rate 2...
All kinds of AEMC Clamp meters. Latest range.
From Japan AC Current/Voltage, Frequencies, Resistance, Conduction check, Temperature (probe sold separately) Wave peak value, Waveform distortion check Auto-power off to prevent the power from being left on Non-fuse type protects up to 600 V AC 1000 A AC Ø 46 mm
The new flexible current probes make your measurement possible where the space is too tight or difficult for clamp meters. Center 26 is composed of a 8.5mm, double-insulated flexible sensor and a True-RMS electronic module with back-lit LCD for accurate and clear reading in all environments. Measurement range from 1 to 3000 A ac, available in 10" and 18" length probe.
Plug into multimeters, oscilloscopes, or power analyzers to measure AC current, up to 3000 A ac. This is also ideal for commercial or residential users who have standard clamp meters, but need to reach hard-to-clamp-on places, or occasionally measure AC current higher than 400 or 600 A. Center 25 simply eases your work.
This is a perfect instrument for diagnostic and maintenance purpose in associate with low current monitoring or troubleshooting. It measures both AC and DC current with very stable 1 mA resolution. It is an ideal choice not only in general industrial filed, but also automotive application to measure sleeping or starting current. The built-in backlit LCD and bright LED flashlight make it easier to work under the hood. Features: 1mA resolution Thin jaw profile for easier wire measurement TRMS for all applications LED working light Backlit LCD 600V CATIII