You have 0 items in your cart.
Kyoritsu
Sub Categories
Category:
Portable Infrared Thermometer
Simple temperature measurement from -40ºC to 500ºC • Laser sight pinpoints measured spots. • Palm size,lightweight 180g only. • Automatic power off for saving battery life. • Maximum or minimum temperature display. • Audible buzzer high alarm standard. • Emissivity adjustable from 0.30 to 1.90 in 0.01 steps. • Backlight.
Category:
Digital Light Meter
Digital Light Meter • 3 ranges changeable from low to high illuminance. (200/2000/20000lux) • Data hold function. • Digital light meter with separate light receiving sensor and meter.
Category:
Digital Illuminometer
Digital Illuminometer • Model 5201 is a highly portable and compact digital illuminometer for measuring illuminance from 0.1 to 19,990 Lux, with auto range switching. • The digital display is held for a preset time (about 20 seconds) and, therefore, facilitates reading, recording and measuring in any direction.
Category:
Sensors, Multi-Trans, Clamp adaptors
Multi-Trans How to Use Clamp your instrument around the pick-up coil of the multi-tran. Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below. Multiply the reading of your clamp meter by 10 to obtain the current value measured.
Category:
Sensors, Multi-Trans, Clamp adaptors
AC/DC CLAMP ADAPTOR • Model 8113 is a clamp-on AC/DC current/voltage converter that permits AC/DC current measurements from 1mA to 200A in conjunction with a voltmeter having 0.1mV resolution.
Category:
Sensors, Multi-Trans, Clamp adaptors
AC CLAMP ADAPTOR Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform on oscilloscope. Refer to a diagram shown at left for application. Specifications are same as those for Model 8112.
Category:
Sensors, Multi-Trans, Clamp adaptors
AC CLAMP ADAPTOR • Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters. Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.
Category:
Sensors, Multi-Trans, Clamp adaptors
AC CLAMP ADAPTOR • Model 8006 is designed to measure AC current up to1500A. • It can accommodate up to 60mm-dia conductor or 50mm by 75mm bus-bar.