You have 0 items in your cart.
Fluke VT02 Visual Infrared (IR) Thermometer 10°C to +250°C (14°F to 482°F) Temp. Range, 2°C Accuracy
Category:
Visual Thermometer
-10°C to +250°C (14°F to 482°F) Temperature Measurement Range 2°C or 2% (at 25 °C nominal, whichever is greater) Accuracy Detect issues instantaneously with digital and thermal blended images Pinpoint hot and cold spots with temperature markers Perform inspections up to 30 times faster than traditional infrared thermometers Document and communicate problems efficiently with SmartView reporting software
Category:
Waveform Generators
Choice of 1, 2 and 4 independent or linked channels 40 MS/s max. sampling speed 16 MHz function generator 10 MHz pulse generator Pulse train pattern generator Arbitrary waveforms of up to 65 k points Powerful modulation capabilities Built-in trigger generators Waveform Manager Plus for Windows® software Multiple standard waveforms recalled from internal memory RS-232 and GPIB interfaces
Category:
Wireless Multimeters
LCD w/backlight 3½ digits Crest factor (50 Hz/60 Hz) 3.0 at 1100 A, 2.5 at 1400 A, 1.42 at 2500 A, add 2 % for C.F. > 2 Log rate/interval 1 sec minimum/adjustable by PC or front panel EMC EN 61326-1:2006
Category:
Calibrators/Injectors
24 V Loop power supply HART mode setting with loop power (adds 250 ohm resistor) 100 % larger dual display 1,200 ohm drive capability on mA source Enhanced backlight with two brightness settings 0-100 % mA Span Check buttons to toggle between 4 and 20 mA Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003) Externally accessible fuses for easy replacement DMM designed to meet 1000 volt IEC 1010 CAT III standards Precision 1000 V, 440 mA true-rms digital multimeter Frequency measurement to 20 kHz Min/Max/Average/Hold/Relative modes Diode Test and Continuity Beeper Simultaneous mA and % of scale readout 20 mA dc current source / loop calibrator / simulator Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp Externally accessible battery for easy battery changes Fluke combined a loop calibrator and a DMM to give process technicians double the power in one tool (the Fluke 787). Now we made it even better – the ultimate loop calibration multimeter – the Fluke 789 ProcessMeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. With its...
Category:
Oil Analyser
Portable diesel fuel and oil contamination monitor.Fitted with laser particle counter. Results inISO4406, NAS and SAE formats.High viscosity pumpallowing oils up to 424cst.
Compact true-rms meter All you need for general electrical and electronic testing Engineered by Fluke, with a three-year warranty
Category:
Automotive Accessories
Allows for hands-free testing in controlled voltage environments 500 VRMS maximum Banana plug is nickel-plated, beryllium copper for low contact resistance The BNC shell is plated for tarnish resistance Operating temperature +50 °C (+122 °F) maximum
Category:
Telephone Test Sets / Butt Sets
Tone (DTMF) and pulse operation Last number redial DTMF signal levels compensated for loop length DropSafe™ unit up to 20 feet Audible electronic ringer Locking mute switch 3-year redial storage time Over voltage and over current protection PBX pause button Field replaceable belt clip Continuous polarity LED indications For use with computerized voice response systems Stores nine 18-digit numbers in repertory dialer (speed dialing) RainSafe™ ruggedness for use in extreme weather conditions TS22A includes above and additionally high impedance monitor for DataSafe™ operation and two-way speakerphone